Select thermostat glue gun easily solve 6 major problems

first of all, let's understand what problems are easy to occur when hot melt glue sticks are used on glue gun with mismatched temperatures.:

i, [Glue leakage]]

II, 【 no glue]]

III,  [Brushed]]

IV, [Pour glue, reverse glue]]

v,  [Slow glue delivery]]

VI, [Delayed glue leakage]]

       these situations are basically caused by the wide variety of glue stick on the market and different types of glue stick softening points.

(Even glue stick of the same model may have inconsistent softening points.)

【 if you have this artifact now, all problems will be solved]]

let's take a look at the causes of the above problems.:

i, glue leakage

the reasons for glue leakage are roughly divided2 species

1, nozzle damage causes glue leakage (replace nozzle)

2, glue stick low softening point causes glue leakage (it can be solved by appropriately lowering the temperature of hot melt glue gun)

II, no glue

there are generally several situations when no glue is available.

1,  no heating: the heating core is burnt out, the fuse is burnt out, and the line is faulty (replace the corresponding accessories)

2,  blocking glue: the temperature of glue gun is too high and the softening point of glue stick is too low, causing glue stick to be easy to age, causing Hot Melt Adhesive to block nozzle and block the gun bore.

III, brushed

the temperature of the hot melt glue gun is too low and the heat supply is insufficient, resulting in wire drawing phenomenon.

IV, pour glue, reverse glue

the temperature of the hot melt glue gun is too high and the melting point of glue stick is low, which easily leads to the phenomenon of pouring glue and reverse glue.

V, slow glue delivery

the temperature of the hot melt glue gun is too low and the power is too small, resulting in slow glue discharge.

VI, delayed glue leakage

      when glue gun is constantly gluing during use, it is difficult to glue out and then place it on the desktop. After a period of time, a pool of glue will leak out.

The reasons for this are generally divided2 type:

1, the temperature of glue gun is low (the initial temperature setting of glue gun is low, and the temperature needs to be raised, even the highest" we recommend that you set the default temperature220 degree")

2, glue gun low power: This100W glue gun can meet the requirements of one-shift production and processing, such as large-area bonding and high using frequency. It is recommended to use hot melt glue gun with higher power,200W even500W temperature adjustment (maximum).

Our products can be wholesale, quantity discount, welcome to consult and negotiate.