Color: White
Voltage: 12V DC (which is the output voltage of a typical car)
Purpose: Reading lights, roof lights, trunk lights, warning lights, and so on.
Instructions: The back of the product is equipped with 3M adhesive tape for easy attachment (to prevent the light board from moving within the lamp shade).
Connector Selection: T10 Port, Double-Pointed Connector, BA9S Lens Mount
Introduction to Joint Size
Double-point diameter: 8.5mm Length: 31mm-42mm
BA9S - Diameter: 9mm
T10 - Diameter: 9-12mm
Color:white
Application:Reading lights, cabin lights, trunk lights, room lights, indoor lights, roof lights, door lights, license plate lights, luggage lights, etc.
Installation:Can directly replace the traditional original car tungsten filament bulb, without needing to modify the wiring!
Structure:Adopting high-power imported high-flow light-emitting diode lamps.
Voltage:DC12V
Performance:Energy saving: It is 1/10 of the energy consumption of traditional halogen lamps, which can better protect the car circuit.
Life is long.The service life is 50000-60000 hours.
Explanation:High brightness, strong vibration resistance, low temperature rise, it is the new generation of solid-state light source.
Product Features:
· Model matches the original vehicle, directly replaces the original vehicle's glass bulb.
· Without filament structure, low heat generation, vehicle control circuits are less prone to oxidation;
· High luminous purity, various colors can be customized, highlighting personalized lighting;
· Cold light source, comfortable, low power consumption, belongs to green light source.
Installation Notes:
No need to modify the circuit, simply replace the original traditional glass bulb, be aware that the original bulb is quite hot, prevent burns!
Refer to the product's dimensions when installing to ensure there is enough space for the installation. Gently press the LED, do not squeeze the LED chip to avoid damage. LEDs have polarity, if they do not light up, reverse the direction and reinstall.
