Yongsheng Zhengpin Posture Pen Set Primary School Student Special Ink Bag Ink Pen Calligraphy Calligraphy Art Pen Men and Women 永生正品正姿钢笔套装小学生专用墨囊墨水刚笔练字书法美工笔男女

	￥36		￥10.78		￥1.4
	￥85		￥4.99		￥138
	￥50		￥8.5		￥2.6
	￥2.7		￥11		￥7.5

【Pen Usage Instructions】

Usage and Maintenance:

(1) Protect the coating on the metal surface to prevent hard metals from colliding and rubbing against each other, and avoid contact with acidic or alkaline solutions. You can wipe it with a soft cloth to keep the pen in good condition.

(2) There are two types of water storage structures: the absorbent device (single-use structure) and the absorbent device combined with an ink cartridge (dual-use structure).

(3) When using the absorbent device, please select high-quality ink without sediment. Before disabling and storing it, wash the interior with clean water, dry it thoroughly, and then store it. If the ink has not been cleaned and remains unused for a long time before being used again, please wash it first, and then use the ink.

(4) Do not use black ink containing gumming agents to prevent blockage of the writing structure and affecting water drainage.

(5) Plastic components should not come into contact with solvents or organic solvents, and should not be placed in high temperatures (65°C).

(6) The writing structure should not be disassembled or assembled by oneself to prevent parts from getting lost or being damaged.

(7) Usage of ink cartridge and absorbent device:
A. Replace the ink cartridge: Remove the old ink cartridge and push the new one firmly into the front of the pen. Place the spare ink cartridge in the pen body as shown;
B. Insert the rotating water absorber: Push it firmly into the front end of the pen, then rotate the tail of the water absorber. First, rotate counterclockwise until air is expelled, then rotate clockwise to draw in ink.
C. Inserting the pull-out absorbent device: Push it firmly into the front end of the pen, then move the pull rod to draw in the ink.
D. Inserting a spring-loaded water absorber: Push it firmly into the front of the pen, then press the spring piece to draw in ink.
(8) Cleaning of fountain pens:
The water storage structure is dual-purpose. Remove the ink cartridge or absorbent device, then immerse the pen tip and front end in warm water until the deposits soften.
After inserting the water absorber, immerse the pen tip in warm water, then hold the tail of the rotating water absorber and rotate it in a counter-clockwise or clockwise direction (for the pull-type water absorber, push the pull rod back and forth; for the spring-type water absorber, press the spring continuously). Change the water multiple times until it is clear, and finally dry it with a soft cloth before storage.
For a single-structured one, simply immerse the tip in warm water, press and knead the absorbent pad until the water is clear, then dry it and set aside.