Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
| brick red | CN¥ 0.0 | 99999 piece available |
|
| pink | CN¥ 0.0 | 99999 piece available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Instruction Manual
1. After the first use and each time, clean with hot water (diluted with dishwashing liquid) or place in the dishwasher. Do not use abrasive cleaners or sponge cleaning. Ensure that the silicone mold is thoroughly dried before each use and storage.
2. When baking, the silicone molds should be placed separately on a flat baking tray. It is absolutely forbidden to let the molds dry-bake. Before baking, you can lightly spray a small amount of non-stick baking oil on the surface of the silicone mold.
3. When the baking is complete, place the baked products on a cooling rack until completely cooled.
4. Silicone molds can only be used in the oven, toaster oven, or microwave, or directly above the heating plate or below the grill.
5. Do not use a knife or any other sharp tools on the silicone, and do not apply pressure, pull, or use violence.
Silicone molds (due to static electricity),,,,, placed in a cool place.
7. Do not immediately rinse with cold water after taking it out of the oven.
【Name】: Silicone Chocolate Molds
【Shape】: 24 small semi-circles
【Size】: 29.3*17.1*1.4cm, Single hole 3*3*1.4cm
【Weight】: About 95g
【Packing】: Bulk
【Material】: Brand new eco-friendly material with a temperature resistance of 240 degrees Celsius to -60 degrees Celsius for silicone。
Silicone mold cleaning and maintenance
1. Before the first use, you can clean it with water or detergent to remove the dust on the surface. Before baking, you can apply a little butter to the inside of the mold. When using a multi-cup mold, if there are empty slots, you can add water to the empty slots, but do not allow the mold to be empty.
2. After each use, soak in diluted detergent for 10-30 minutes. When cleaning, use soft cloths and avoid using rough cleaning sponges or similar items to prevent scratches on the mold. After cleaning, allow to dry and place in a storage box. Silicone is prone to static electricity, which can attract tiny particles and dust in the air. Do not leave it exposed to the air for long periods of time when not in use.
3. When using the oven, ensure that the mold is placed in the center of the oven, about 10cm away from the heating elements, and about 5cm away from the oven walls to prevent damage from high temperatures.
4. Some of the molds have cracks. These are pre-cut openings that were made at the factory to facilitate the removal of the molds by the buyer. Without these cuts, it would be impossible to remove the molds. When using the molds, align the cuts, cover them with plastic wrap or put rubber bands around them, and then pour the liquid into them.
Silicone mold product features:
1. Silicone is mainly composed of silicone, a natural component found in sand, stones, and crystals. It is not rubber or plastic! Silicone is the stone on the beach, low carbon and environmental protection.
Silicone is highly flexible, corrosion-resistant, and has good temperature tolerance, making it suitable for cooking, baking, and is simple and practical.
3. By detection, health and hygiene, clean and convenient, can prevent the proliferation of bacteria and fungi. Therefore, in infant and child care products and medical supplies, there are a large number of silicone products. Such as: baby bottles, silicone plastic surgery, etc.
4. Recyclable, durable, and low in energy consumption.
5. The product has stable structural mechanical properties, which makes it highly resistant to high and low temperatures, with a wide temperature tolerance range. It can withstand temperatures as low as -40 degrees Celsius and as high as 230 degrees Celsius, with uniform heating and freezing resistance.
6. Has anti-corrosion performance against cleaning agents and other types of corrosive substances and is easy to clean.
7. After use, no ingredients will stick to the mold.
Update time：
TOP
