AT-6000 exhaled gas alcohol content detector is an instrument dedicated to testing the alcohol content in exhaled gas of human body. This machine sensors adopts Hanwei electronic advanced nano semiconductor alcohol sensor, which has excellent sensitivity and excellent repeatability; The test program is controlled by microcomputer designed by artificial intelligence, and the work flow is reasonable, concise and convenient, full-featured, with a variety of adaptive capabilities; Backlit LCD digital, word picture display, intuitive and clear; Compact and portable design makes it easier for you to move. When the alcohol content in the exhaled gas exceeds predetermined valve, this opportunity will automatically send out a sound alarm to remind you of your safety.

The design, manufacture and inspection of this product comply with the following standards:

GB/T21254-2007 alcohol content detector for exhaled gas
GB19522-2004 threshold and test of blood and breath alcohol content of vehicle drivers

features:

1.   advanced Nano semiconductor alcohol sensor;
2.   quick response and recovery, quick and convenient detection;
3. SMD assembly process, stable and reliable performance;
4. artificial intelligence microcomputer control;
5. visual Display of the test process screen;
6. LCD digital and word chart display with blue backlight lighting;
7. portable Design, compact and lightweight;
8. automatic sound alarm for alcohol exceeding limit;
9. sensor fault self-test;
10. intelligent Power saving design, battery undervoltage indication

main technical parameters:

reference * BAC:Blood Alcohol Concentration Blood Alcohol Concentration * 0.05% BAC means that every 100ml Blood contains 0.05g or 50mg Alcohol

matters needing attention:

1. Test after drinking for at least 20 minutes, because it takes about 20 minutes for alcohol to be absorbed into the blood from the digestive system. Test immediately after drinking, the results can only reflect the alcohol concentration in the oral cavity at that time, not the alcohol concentration contained in the blood.

2. To make the test result accurate, please wait 20 minutes after drinking before testing. The test time is more than 3 minutes from the last Test.

3. Do not wipe the product directly with chemicals or corrosive dissolved liquid to avoid fluid inflow bubble-tube.

4. If in a gas environment with high concentration, the product will not work properly.

5. If the test is conducted under low power, there will be a certain deviation between the test value and the real value.

6. It is strictly prohibited to place and use in a closed environment with corrosive gases or dirty air, such as pigments, pesticides, alcohol, etc.

7. Unauthorized repair and damage of internal parts will lead to product failure.

8. After using for a long time, there may be dirt on the tester. Please use a clean cloth to wipe it.