Product packaging specifications:

                  50ml/piece, 10 PCs/box, 80 pcs/box.

Kafuter UV glue (UV glue) selection guide:

Instructions and technical parameters:

■ typical curing properties:
K-303 will solidify at UV-irradiation and slowly solidify in the sun.220-260nm the light source is helpful for surface curing.. Curing rate, curing depth and surface drying effect are related to ultraviolet light source, illumination time and light transmittance of material. It is suggested to determine the curing process through experiments.

■ Positioning Time:
6s-125w PHILIPS high-pressure fluorescent lamp, 4.5 mW/cm2 UVA 3mm thick PMMA/PMMA

■ typical curing performance:
tensile shear strength (GB 7124-86) lap area 25 × 5=125 mm2 : PS/PS,4 ~ 5MPa are PS damage 30℃

■ instructions for use:
1. Clean the sizing. Before gluing, the bonding surface must be dedusting, degreasing and drying. Determine the dispensing amount as needed.
2. Cooling devices are required for temperature sensitive materials such as thermoplastic materials.
3. Check the curing of plastic materials to prevent the liquid from causing stress cracks on the materials.
4. The Extra over cemented can be wiped off
5. Use the remaining glue and do not pour it back to the original package to avoid pollution.
6. When the temperature is lower than 20 degrees, preheat the substrate to between 30 degrees and 35 degrees to ensure the adhesive force.

■ The matters needing attention:
avoid contact with eyes, skin and clothing. This product has slight irritation to eyes and skin. If you accidentally splash into your eyes, please rinse with plenty of water immediately. If you still feel uncomfortable, you must go to the hospital for examination. Rinse with soap water immediately after skin contact. Please clean the clothes before they can be worn. Do not contact children.

■ storage: this product is sensitive to light and heat, and needs to be stored in a cool and dry place, kept away from light, below 28℃, valid for one year.

■ packaging specifications:50g/piece or 250g/bottle packaging