X Email Mobile
| caihong 101 gun plus two needles | ¥0.0 | 99240 pcs available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Yiwu GuangYue Machinery Equipment Co., Ltd 4yr.
Main Products:Automatic binding machine,automatic binding machine,glue needle machine,waist card machine,automatic equipment,clothing hanging granule,washing label cloth label,trademark hanging tag,hanging tag gun,hand-in-hand pin buckle
Contacts:HuangtianpeiChat
Mobile:86-18058491846
Address:Unit 5, building 3, Xiawan district 2, Qingkou industrial zone, Yiwu city, Zhejiang province,Yiwu,Jinhua City,Zhejiang Province
Related items
The entire series is equipped with 3 steel needle heads.
Product Name: Caihong
Model: 101
Needle Specification: 2MM Thread Size
The knife needle with a total length of 3.5 centimetersThe gun length leaks out to be 2.3 centimeters.
The tip of the needle is sharp, and the use is highly effective.
Applicable scope: matches 50 pieces or 56 pieces per piece of adhesive needle
Tagging Gun
Label gun
Tag Fasteners Installation
Fastener Installation
Step 1:Grip the gun handle
Step 1: Grip the gun tightly
Step 2: Insert either end of the tag pin connecting bar (T letter port) into the hole at top of the gun, push the pin into the slot as far as it will go on.
Step 2: Insert the tag pin connecting rod (T-port) into any of the holes at the top of the gun, and push the pin as far as possible into the slot.
Step 3: Release the handle, finish and begin use
Step 3: Release the handle, complete the setup, and begin using it.
Needle Installation
Bundling needle installation
Step 1: Set the white switch to 3 o'clock
Step 1: Set the white switch to 3 o'clock.
Step 2: Keep the needle slot and gun slot on the same horizontal line and insert
Step 2: Keep the needle groove and gun groove on the same horizontal line and insert
Step 3: Set the white switch to 9 o'clock position and begin to use
Step 3: Set the white switch to end at 9 o'clock and start using it.
Attention:
Attention:
1. When not in use, protect the needle by the covering cap.
1. When not in use, protect the needle with the cap.
2. Before removing the tag pin, please grip the gun handle first, then remove it. Otherwise, it may damage the fittings in the gun.
2. Before removing the tag pin, please grasp the gun grip first and then remove it, or it will damage the internal parts of the gun.
Update time：
TOP
