X Email Mobile
| EXW Price: |
|
| Main Products: |
light |
| Contacts: | GONGChat |
| Mobile: | 86-18413391381 |
| Address: | 20209 , 4 Street, 1 F, 东8号 Gate, International Trade Mart (District 2) - East. |
| Address: | Yiwu,Jinhua City,Zhejiang Province |
##> product features ##<
1. Solar energy is automatically charged, and the product adopts high-efficiency solar cells.
2. Built-in lithium battery, the product uses large capacity lithium battery, A product cell, no memory effect, longer life.
3. Ultra-high brightness, the product adopts ultra-high brightness imported chip LED, and driving at night has the functions of width warning and decoration.
4. Intelligent opening function, the product adopts light control and micro vibration sensing system, which automatically turns on flashing when driving at night.
5. Intelligent shutdown function. The product adopts a single chip microcomputer with a delayed shutdown system. It will automatically shut down after 30 seconds in the parking or vehicle static state.
Tips: General-purpose type, one wheel and one light, it is recommended to buy four for one car, which has achieved the best display effect!
This product can choose a variety of colors, color light, red light, green light, blue light, which is equivalent to spending one money to buy four products, the following is a real shot picture of a product that emits multiple colors of light!
The research and development significance of this product is defined as: driving safety indicator warning light. For example, night, rainy days, ice and snow foggy weather can all play a warning role, making cars safer to drive under the influence of bad weather. And the effect is unique and stylish!
Instructions for use:
Note:
1. Please charge it in the sun for more than 3 hours before use;
2. Clean the exterior of the product frequently and keep the surface clean to ensure the normal work of the product;
3. Please tighten each screw and install the product firmly to avoid the product from falling off when the wheel rotates at high speed.
Installation instructions:
1. Use small flathead screwdriver to take out the original wheel logo
2. Use caliper or common measuring tool to measure the foot clip diameter value of the original car mark
3. Loosen the pin diameter positioning screw of this product with a screwdriver;
4. Adjust the required diameter according to the value of the original measured card foot diameter. The four foot positions need to be adjusted at the same time to keep the center symmetry of the four foot positions of the product, and tighten the screws after the adjustment is completed;
5. Use calipers or common measuring tools to measure the height of foot clip of the original car mark;
6. Install pressing buckle according to the height value of the original measured card foot, and keep the height of the four pressing buckle consistent;
7. Clamp the circlip in the middle position of the inner buckle of the four feet to ensure the elasticity of the feet;
8. Press the product into the original car logo of the wheel hub
9. Cover the light, press the switch for 3 seconds to turn on the product, and the whole installation is completed.
TOP
Items have been added to the Inquiry Basket
There are items in the inquiry basket
