Contact online customer service or call for more information. TEL: 15958940789 QQ:2568707108Learn more about the styles

The colorful wallpaper has a very obvious decoration effect, which can transform the room into various atmospheres. Moreover, the cost is quite affordable. What is the process of wallpaper installation?

Wallpaper Installation Steps

Hanging wallpaper also has a process, which usually includes five steps,

1. Firstly, the base layer is cleaned, the gaps are filled, and joint strips are pasted at the joints of gypsum board, and the joint compound is patched;

2. Scrape and smooth the putty, when dealing with the basic layer, it must be cleaned, leveled, and smooth.

3. Apply moisture-proof agent, the coating of moisture-proof paint should be uniform and not too thick.

4. Cut the paper and apply glue, and use a plumb line to mark the width of the wallpaper on the wall.

5. Apply wallpaper to the wall, align the edges, and use a rubber roller to flatten the wall and push out air bubbles from the adhesive. Trim, use a wallpaper knife to cut off any excess wallpaper from the ceiling, skirting, and windows, and wipe off the glue.

Wallpaper hanging steps:

1. When applying wallpaper by yourself, the first thing you need to do is to use a scraping board to smooth the wall surface, clean away any loose plaster, and remove any dirt from the wall to ensure a flat and clean surface.

After the wall surface is cleaned and made smooth, we need to use a scraping board to evenly score lines on the wall surface. The scored lines allow the wallpaper adhesive to quickly penetrate into the wall surface.

After the indentations caused by the adhesive for the wallpaper on the wall surface are repaired, you can begin to apply the wallpaper adhesive to the wall surface. When applying the wallpaper adhesive, it is important to ensure that the application is uniform.

After the paste for wallpapers is evenly applied to the wall, it needs to be allowed to dry for about five minutes before pasting the wallpapers. During this time, we can prepare the wallpapers, cutting them to the actual dimensions of the wall.

 After the wallpaper has been cut to size, it can be pasted onto the wall. When pasting wallpaper, it is important to start from the top and work downward, layer by layer. Also, be sure to secure the corners firmly, without any gaps.

  6. When applying wallpaper, it is inevitable that bubbles may occur. If these bubbles are not eliminated in time, they can easily cause the wallpaper to peel off. We can simply pierce the wallpaper with a needle where the bubbles are, and then smooth the wallpaper to level it.。