【Brand】：Non-factory

【Origin】:China

【Color】:As shown in the figure

【Size】: 4000mm

【Packing】：PVC sucker card

【Explanation】:  3 ton trailer rope

When driving out, it is inevitable to encounter car problems, such as a sudden breakdown on the highway or at night...
At this time, you definitely need to use a tow rope to tow the car away from the stranded location. The selected reinforced material for the thickened tow rope has a bearing capacity of 3 tons, and it has undergone special processing to reduce vibration between the two vehicles when towing. The forged with a lock iron hook is more firmly, and it can prevent the iron hook from falling off when towing. The bright yellow color is selected to be particularly eye-catching, adding one more point for your emergency in the night.

High-quality polyester: It is woven by a weaving machine in one step, through a series of processes including dyeing, high-temperature drying, and ironing.
◎ The reinforced casting with a lock hook is more secure, and it can prevent the iron hook from falling off/breaking when towing (within the rated tonnage).
It would be convenient for you to tow your car away from the stranded location.
◎Please do not exceed the authorized tonnage.

1. The trailer rope has been specially processed to reduce vibration between the two vehicles when towing.
2. Trailer ropes are fluorescent colors, making them more visible at night.
3. Forged with a lock, the iron hook is more secure and will not come off when towing.
4. It's convenient for you to tow the car away from the stranded location.
5. Please do not exceed the authorized tonnage.

【注意事项】
1. Can not exceed the prescribed load usage;
2. Do not drag on rough surfaces;
3. Not to be used for patching damaged towing structures;
4. When towing, the vehicle should be slowly pulled tight, not dragged.
5. Should be regularly checked to ensure the normal use of the towing.

【Give up using】
1、Corroded by acid or alkali.
2. Any part of the trailer has melted, carbonized, or weld spatter injuries.
3. Any part of the tow rope is knotted.
4. Deformation, holes, corrosion, and damage to accessories.
5. Long-term use raises questions.

【Towing Tips】
No matter what level of car, it is inevitable to encounter problems while driving on the road. If the car breaks down and cannot continue to move forward, as long as it is not a major problem with the steering or braking system, it can be towed back by oneself, and then repaired.

Tie one end of the tow rope to the front of the rear axle plate of the front car, and tie the other end to the front of the front car as close to the vehicle as possible. The distance between the two cars should be more than a few meters. It is good to tie a handkerchief in the middle of the tow rope as a identification marker.

When towing, an experienced driver should drive the vehicle at the back, as the vehicle at the back is difficult to control. If there is a slight carelessness or improper operation, it is possible to press on the tow rope or not to bend, leading to a following collision accident.

When starting the trailer, because of the additional weight of a car, the front vehicle should add more fuel to increase the engine's RPM, and then slowly release the clutch pedal, allowing the rope to tighten before starting. While driving, it is important to control the vehicle speed, even if the road conditions are good, do not drive at high speed.

When the vehicle in front shifts gears, the tow rope will loosen for a moment. At this time, the towed vehicle should not apply the brakes. Otherwise, when the leading vehicle accelerates, the tow rope will suddenly tighten, causing a shock. Only when the rope is on the ground for a moment can you gently apply the brakes.

When descending a long slope, you can untie the rope and let the two cars slide down separately, which is very safe; if the slope is not long, you can descend with the rope attached. The leading car should not easily step on the brakes, while the following car can lightly step on the brakes to keep the rope always taut.

When stopping at a crossroad, the vehicle in front should lightly press the brakes a few times to signal the following vehicle, and then the following vehicle should apply the brakes to bring both vehicles to a stop. When making a turn, be aware to take a wide turn, and try to tighten the rope to avoid any danger.