Welding gloves are a kind of manual gloves for welders, which can protect workers' safety and comfort. Suitable for cutting, welding and moving

transportation and other purposes.
Chinese name
welding gloves
interpretation
welder manual gloves
usage
suitable for cutting, welding, handling, etc.
Special point
abrasion resistance, knife cutting resistance, tear resistance, etc.

Standard function
moisture-proof, abrasion-resistant, knife-cutting-resistant, tear-resistant, puncture-resistant, oil rub resistance, fire-resistant, heat-resistant, heat-resistant airflow-resistant, and fine gold-resistant

it belongs to slag.
Welding gloves belong to welding labor protection products.
Its function
1: prevent electric shock. During the welding process, welder gloves can protect welding personnel from electric shock. Taking electrode Manual metal-arc welding welding machine as an example, the no-load voltage is generally between 50V and 90V. Compared with 36V AC safe potential, no-load voltage of welding machine for welding operators

personnel also belong to dangerous voltage. Therefore, welder gloves must reach a safe pressure resistance of 3000V.
2: prevent burning and scalding. Except for tungsten argon arc welding, there is no spatter, and other welding types have spatter.

Workers cause burning and scalding of hands and wrist. Welder gloves use suede material to effectively isolate welding spatters

burn and scald the hands and wrist of welding operators. In addition, welding arc light belongs to harmful light radiation source, and gloves can also have

effectively isolate the radiation of harmful light opponents and wrist.
Material
outer layer: Cow split leather, cow first layer leather, pigskin, sheepskin and other natural leather. Inner layer: thickened lining, pure cotton lining, cotton lining, denim lining and other lining.
Features
it is mainly used for wear resistance, cutting resistance, fire prevention and heat insulation, radiation blocking, and certain insulation performance.
Main species
different types of welding, the impact on welders is not necessarily, therefore, according to various types of welding, it can be roughly divided into two types of arc-welder's gloves:
argon arc welding gloves (TIG) this kind of welding spatter is less, but the temperature is high, the radiation is strong, and the welding wire is relatively thin. Therefore, this kind of gloves

feel good, relatively thin, not too long.

Ordinary manual welding gloves are called manual welding, which is the welding that we usually use a pair of pliers to clamp the welding rod. This type of welding

there are many high temperature splashes. So the gloves are mostly Gary's double layer. The length is also over 34cm.
Precautions
in the process of using gloves, pay attention to the following points:
1. Select gloves suitable for different workplaces according to the above table. The size of the gloves should be appropriate. If the gloves are too tight and restrict blood circulation, it will easily cause fatigue and discomfort. If they are too loose, they will not be flexible to use and will easily fall off.
2. The gloves selected should have sufficient protective effect. For example, if the environment of steel wire cutting-resistant gloves is selected, synthetic gloves cannot be selected.

Yarn cut-resistant gloves, etc. To ensure its protective function, gloves must be changed regularly. If the usage period is exceeded, it is possible

hurt hands or skin.
3. Check the gloves at any time to check whether there are small holes or damaged or worn places, especially finger seams. For welding gloves

to use the inflation method for inspection.
4. Pay attention to the use of gloves. If a pair of gloves is used in different places, the service life of gloves may be greatly reduced.
5. Pay attention to safety during use, and do not throw the contaminated gloves at will to avoid causing harm to others. Hands not used for the time being

put the set in a safe place.