car safety hammer four-in-one life hammer escape hammer flashlight emergency light multifunctional safety hammer 200g

Just earn credit; zero profit, hurry up and grab it.

This product comes in two packaging options: color box packaging and suction card packaging.

Product dimensions: diameter 3.9 cm, length 19 cm
Battery Usage: 2 AA batteries (to be purchased separately by the buyer)

Product Introduction:
This product is used for night fault warnings and emergency escape in case of car accidents, and can also be used as a regular lighting device.

1. Life raft hammer/safety hammer:A sharp and sturdy hammer can break the glass to escape in case of an accident.
2. ScissorsHook-shaped embedded blade that cuts off the seat belt for escape in case of an accident.
3. Flashlight:Located at the front of the handle, it features a separate switch and provides continuous lighting.
4. Warning Light:Located at the handle section, it features an independent switch with 9 red light-emitting diodes that flash. The magnetic head of the product can be attached to the roof of the vehicle for an alert function.

  

Instructions for use:

Insert 2 AA batteries in the specified direction, then close the battery cover.
Press switch 1, and the fluorescent bulb at the top will light up to provide illumination.
Press the switch 2, and the LED will flash.
If you encounter any issues at night, you can use the magnetic attachment at the bottom of this product to stick onto the car roof, which serves as an alarm function.
In case of an accident and unable to release the seatbelt, use the blade to cut the seatbelt and escape.
In case of an accident where the doors and windows cannot be opened, you can use a hammer to break the glass and escape.

Note:
This product is magnetic; do not place it near metal objects or anything that may be affected by magnetism.
This product should be kept in the car or at home for emergency use; do not carry it with you.
Please remove the battery when not in use, and insert it back when needed.
Please do not twist the bulb part too much, and the battery is removed and installed from the magnet section.