Product Introduction:

[Product material] imported reflective material, waterproof and sun protection high temperature resistance

[Product size] 30X19,40X25,50X32CM

[Craft] Carving

[Quality] professional independent production, quality assurance.

1. Behind cleaning trolley, use sprinkling can water spray on the body part to be pasted-mainly used to reduce the viscosity of the sticker and adjust the position conveniently.
 2. After determining the position to be pasted, transfer membrane (transparent reflective sticker pasted on adhesive film) together with bumper stickers, lift one side from right to left [or from top to bottom] and press it on the car table with a rag, then stick it, flatten it with a rag, and open the bottom paper.
 3. If you encounter door handles or bumper strip, cut the materials and wrap them in or load them according to the situation.
 4. Adjust in time to make sure that the graphic approximate location is correct. Use a scraper to repeatedly scrape off water and bubbles. When using the scraper, it will be scraped from right to left; Finally, tear off the transparent transfer membrane.
 5. In case of car door and seam, divide them evenly by art knife, and bag and plaster inward.
 6. Try to dry the water in bumper stickers. If necessary, you can use hair dryer to properly heat and dry it. Suggestion: try not to expose to the Sun within 24 hours, and do not wash the car within 48 hours.