supply gas blow torch, flame gun, card welding gun blow torch antivirus disinfection gas gun

 Packing Specification: 100 pieces per box, Specification: 27X4.5X2, Net Weight: // grams

1) Usage: Our ignition gun is suitable for a variety of needs indoors and outdoors - camping, cooking stoves, barbecues, candle lighting, etc.
2) Design: Single-action insurance lock, gas can be recharged for repeated use;
3) Function: Open flame. Gas addition, piezoelectric ignition;

4) Type: Piezoelectric type;
5) Adjustable flame: The size of the flame can be adjusted, and the fire ring in the middle can be opened, with a fuel viewing window.

Details of Use

Grilling

Wild cooking/cooking/hotpot, etc.

Wildfire

Processing pig's feet, processing pig's head

Choices for handling poultry feathers

Iron pipe/copper pipe/plastic pipe and other bent pipes

Metal Surface Cleaning

Cement/Terrazzo surface treated to resemble natural stone

Welding

Cutting

Bamboo and Wooden Craft Processing and Manufacturing

pipe thawing

Engine pre-heating for rapid start in winter

Building Waterproof Construction

Drying and heating

The features of this product:

Flame size can be adjusted.

Flame temperature can be adjusted.

The flame temperature can reach up to 1500 degrees Celsius.

It can spray fire in all directions, including up, down, left, and right, by 360 degrees.

Windproof, moisture-proof, and water-resistant, superior to electric welding

Replacing the air tank is extremely convenient, and it takes only 1~2 seconds.

Can work continuously for a long time.

Full-automatic electronic ignition

Care Instructions: 1. The product contains pressurized flammable gas. Please keep it away from children. 2. Do not pierce or throw the lighter, and do not throw it into fire. 3. Use it in a well-ventilated environment, and be aware of flammable items. 4. The fire head direction must not be towards the face, skin, or clothing and other combustible materials to prevent danger. 5. When lighting, please identify the position of the fire outlet and press the ignition moderately. Different models of lighters use different ignition methods: straight, side, and edge. For gasoline engines, it should be quickly rubbed on the sandpaper.1. Use the thumb to rub the cylinder quickly from right to left; 6. If there is any ash or other debris falling into the fire outlet accidentally, it should be immediately blown away with force to remove the debris, otherwise it may cause poor ignition; 7. If the lid of the loud and sandpaper lighter is opened, the gas will begin to escape. Therefore, please make sure to close the lid tightly when not igniting; 8. This product is not suitable for lighting, please do not continue to burn for more than 1 minute to avoid high temperature burns; 9. Do not leave the lighter in a high-temperature environment for a long time (122°F), and avoid direct sunlight for a long time, such as around the stove, enclosed carriages and trunks in the open air.

Section 4: Lighter Knowledge: (1) All lighters sold in our store are reusable and can be refilled with gas. However, due to the transportation restrictions, lighters must be deflated before being shipped. You need to refill them after receiving the goods to use them normally. (2) It is recommended to use butane gas with a pressure of 36-42 atmospheres. Commonly used brands include Xingguang, Aili Qi, Baicheng, Dunhill Gas, etc. (3) When refilling, first shake the gas bottle a few times. Then, hold the lighter upside down, insert the gas bottle nozzle into the air intake hole at the bottom of the lighter, and if there is a side spray, rotate the nozzle appropriately to ensure full contact. Press moderately 2-3 times, and note not to light immediately. (4) After refilling, wait for about 1 minute, then try to light it. If it doesn't light, you need to adjust the flame. (5) The optimal flame height for open flame lighters is about 30cm, for windproof lighters about 20cm, and for direct-injection lighters about 2cm.Approximately 5cm; (4) If the fire still does not ignite after adjustment, you can adjust the air hole to the smallest, then completely empty the gas, and then refill it, gradually increasing the adjustment. If there is still a problem, it is recommended to replace the high-quality gas; (5) When the grinding wheel moves in the correct direction without obvious sparks, please replace the striking stone; (6) First, remove the middle support part, twist out the top screw with a screwdriver, remove the spring, pour out the remaining striking stone, put in the new spare striking stone, then put the spring back in, tighten the screw, and insert the body into the shell.

*********************************************************************************************************************************************************************************************************************************

**********************************************************************************************************************************************************************************************************************************

**************************************************************************************************************************************************************************************************************************

 Alibaba