Wholesale Direct Sales of Four-Wheeled Inline Skates for Children

plus size

20 pairs/box

Contact Information: 15868966218, QQ: 470061229

Use and Safety Instructions

Notes:

1. Users must first check whether the moving parts are tightened before use.

2. After each use, wipe the brush clean with a dry cloth, and apply bearing oil to the wheels and bearings.

3. Children under the age of five should slide under adult supervision.
4. When gliding, you should wear enough protective equipment (such as elbow pads, knee pads, and a helmet).
5. Before sliding, it is necessary to check whether the screws, rivets, and shoes on the product are firmly fixed.
6. Should skate in a safe and legal location.
7 should avoid skating in places with many cars or people or at night.
8. Should avoid sliding on wet, oily, or uneven surfaces.

Wheelchair maintenance
1. Regularly remove the inner socks from your shoes for washing to prevent odour and prevent bacteria from growing.
2. Frequently switching the wheels on the left and right sides of the in-line skating shoes can make the wheels more durable.
3. Avoid sliding on rough surfaces to extend the service life of the wheels and bearings.
4. Do not replace individual wheels or bearings, as this will reduce the stability of the gliding.
5. If the bearing is used for a long time and does not run smoothly or makes a 'sounding' noise when sliding, you can remove the bearing and soak it in 'degreasing oil' for about half an hour to clean the impurities from the bearing, and then spray it with engine oil or special bearing oil. This can extend the service life of the bearing.
6. When the product is not in use, it should be stored in a dry and shade-free place. This helps prevent the accessories from rusting and the product from aging.

Shoe maintenance

Ordinary should do:
Do not walk on grass or mud, as this can wear down the wheels of your roller skates and sand can get into the bearings, requiring frequent cleaning.
Do not play roller skating as much as possible in the rain, because water will make the bearings rust.
The bearings have rust and need to be lubricated with a small bottle of grease (oil can also be used). First, use gasoline to thoroughly clean the bearings inside and out, and then apply the grease to the roller bearings, not too much, just enough to cover the rollers.
If you slide frequently, it is recommended to maintain the bearings once every two weeks, and if you do not slide frequently, you can maintain them once a month.
If the bearing makes a noise but the rotation speed is unaffected, it is not necessary to clean it. This is because the noise may be caused by excessive sliding or excessive vibration, which has caused changes in the structure of the bearing itself. Therefore, cleaning the bearing at this time may easily lead to a significant reduction in the rotation speed, or even no rotation. If you want to reduce the noise, you can apply a little lubricating grease appropriately.

Contact number: 15868966218, 470061229