Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
Price Negotiable
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
YIWU YUEJING ART & CRAFT CO.,LTD 5yr.
Contacts:JaneChat
Mobile:86-15258995067
E-mail:janeyuejing@163.com





Note: Hot melt adhesive and double-sided tape are different. After adhering to the wall, it will not damage the wall. No trace is left.
Note: This product is individually packaged. The quality is excellent.
Name: Balloon No Trace Glue Dot
Diameter: Approximately 1cm (Please refer to the actual item for accuracy)
Weight: About 1.2g
Specification: One roll about 100 glue dots.
Suggestion: Make sure to apply the stickers to the balloons in one go, or it's easy to tear the balloons when you try to peel them off.
All images are taken from the actual product, and any unauthorized use will be pursued!
Notes
Please remember not to pull directly down when removing it. Remember, remember! If you do, you will hear a 'tension' sound, and the bricks might come out. The correct method is to slowly peel it at a 45-degree angle towards the diagonal up, which is similar to peeling a film, not pulling or tugging. The important feature of the new film is that after it is removed, there will be no glue on the wall, which will not affect the wall.
1. This product should not come into contact with oil or dust, as they may affect the adhesive properties and adhesion of the product.
The adhesive surface must be kept clean and dry, and only after cleaning can the adhesive be used for spot bonding.
2. When operating, avoid contact between your fingers and the adhesive surface. Place the object directly on the "adhesive point" surface and press lightly. Immediately transfer it to the object, and it can be pasted onto another object. After pasting, you must press firmly to ensure full contact between the adhesive surface and the pasting surface, and no air residuals, so that the pasting effect is better.
3. When pasting the balloon, make sure to do it in one go, or it's easy to tear the balloon when you try to peel it off. If you want to reduce the adhesive strength, you can apply it to your hand first and then paste. Be careful that the glue might damage some surfaces that have been sprayed (especially rough walls or those that easily flake off when touched), so it's recommended to test the adhesive strength on special materials before using it.

Update time:
TOP