Name: guide plate brand: CMA

applicable model: 5200 5800 chain saw, electric chain saw

3/8p 3/8 404

many parts of chain saw are sold by our company. Welcome customers to come to consult!

Maintenance of guide plate:

1. Before using chain saw, work should be done only after chainsaw chain oil is thrown out. After the chain saw is finished, it should be put in the oil Bowl. In the work, attention should be paid to the change of cutting fragments of chain saw. When the serrated teeth of chain saw are not sharp, special chain saw file should be applied to rest the cutting teeth of chain saw to ensure the sharp teeth of chain saw. The correct operation method is: along the direction of the cutting teeth of the chain saw, and the teeth can only be cut in the direction of the teeth, and must not be pulled back, the angle between the chain saw file and the chain chain of the chain saw is 30 °. If the angle is too large, the chain saw chain of the chain will be more blunt, while if the angle is too small, it will cause indurability, therefore, the angle must be well grasped, otherwise it will cause adverse effects on chain saw chain and guide plate.

2. To protect chainsaw guide plate heads, you must use chain saw chain oil correctly. Saw chain oil provides lubricating oil and reduces the friction heat between Saw chain and chainsaw guide plate head during saw chain and wood cutting, thus protecting chainsaw guide plate. Before working, check whether the chain oil of chain saw is sufficient. After starting up, we should wait until the saw chain oil is thrown out and then work. The chain saw chain without saw chain oil will be annealed at high temperature during work, causing the chain saw chain of the chain saw to be scrapped too early, in severe cases, the service life of chain saws will even be reduced.