Imitation Wood Embroidery Frame Embroidery Frame ABS Plastic Multiple Models Cross-Stitch Holder Embroidery Frame 7*7.5

Size is inner diameter, weight 7*7.5cm 43g

 9.5 * 110cm 58.3G

 14.5 * cm 100g

Retro pattern, heavy and textured, can be placed in crafts, the outer ring is slightly elastic, and can be twisted into twist rubber ring

Material: rubber plastic unadjustable

Advantages: nested, not slippery, stable, thick

Reminder: the color of the product is subject to the following real picture shooting!

Note: Because the outer layer rubber gasket is elastic, there may be small depressions squeezed during transportation, and the horizontal plane may be uneven or not round. You can adjust the flat and round by hand, this is related to its stretching principle and material. It can only be put on when the inner ring is slightly crushed when it is stretching. It is not a quality problem. Do not compare it with embroidery frame with screws. Do not disturb if you mind,

imitation Wood embroidery frame 11 x15 (rectangular) about: 60 g/piece

Imitation Wood embroidery frame 14 x14 (octagonal) about: 60g/piece

Imitation Wood embroidery frame 22X29 (Oval) about: 115g/piece

Imitation Wood embroidery frame 18X25 (Oval) about: 110g/piece

Imitation Wood embroidery frame 15X19 (Oval) about: 80g/piece

Imitation Wood embroidery frame 12X15 (Oval) about: 65g/piece

imitation Wood embroidery frame 8X10 (Oval) about: 32.2 g/piece

Imitation Wood embroidery frame 25cm (round) about: 115g/piece

Imitation Wood embroidery frame 21cm (round) about: 100g/piece

Imitation Wood embroidery frame 17cm (round) about: 70g/piece

Imitation Wood embroidery frame 14cm (round) about: 55 g/piece

Imitation Wood embroidery frame 10cm (round) about: 34.2 g/piece

imitation Wood embroidery frame 7.5 (round) about 26.4 g/piece

embroidery frame instructions:

1, first separate the inner and outer frames of embroidery frame

2, slightly loosen the outer frame screws

3, place the outer frame flat on a flat desktop (the front of the outer frame faces down)

4, flat embroidered cloth, spread on the embroidery frame outer frame (embroidered face down)

5, press inner frame with a little force and press the embroidery cloth into the outer frame (inner frame face down)

6, try to stretch the tightness of the embroidery cloth, you can do embroidery in a tight state

★ Tips for new embroidery:

a. The embroidery effect stretched on the flat desktop

B. In the case of unstretched cloth, the first adjustable screws tightness can make the embroidered cloth more tight

c. When stretching the cloth, you need to place the outer frame, embroidered cloth and the front of the inner frame face towards the desktop.