"Baby name" cross stitch steel sheet needle-threader

[Product Specification] total length 5cm

[Product price] one price is the price of a threader

however, some works need to use 3 or 4 threads to pass through small needle holes.

In particular, some DIM kits need 5 or 6 lines, or 18ct

that's really our eyesight and endurance ~

with this needle-threader, it is much more convenient

5.6 threads are completely out of the question ~

this needle-threader is suitable for 10 embroidery needle, sewing needle or bead threading needle with small pinholes cannot be used

[Instructions for Use] text with the following figure

1. Wear needle-threader into the needle eye
2. Keep it inside and hang it
3. Take out the thread that is ready to be threaded, and here we specially use 3 strands to demonstrate
4. Hook with needle-threader front end Hook line
5. Pull the needle forward
6. Pull the wired part hard
7. The needle is separated from threader. One end of the thread is in the eye of the needle and the other end is in needle-threader.
8. Remove the thread from the needle-threader, and the threading is completed