[Product name] simple stamp pin
material; Electroplated alloy

[Product description]]

package A combination 9-20 head plus converter Rod: 9.0;10.0;12;14;16;18;20 needle, plus A replaceable plug converter rod; Storage box about 20.3g

package B combination full size head 9-50 head plus converter Rod: 9.0;10.0;12;14;16;18;20;25;35; No. 50 needle, add a converter rod with a length of replaceable plug; A needle is thread guide machine; Pearlescent bag plus storage box packaging; About 37g

package D combination 9-20 head plus converter Rod: 9.0;10.0;12;14;16;18;20 needle, plus a replaceable plug converter rod; A super long needle-threader; Storage box about 19.5g

9#(Needle thickness 0.9mm, about 1 strand can wear cross stitch thread)
10#(the needle is 1.08mm thick, about cross stitch thread thick can be worn)

12#(Needle thickness mm, about 2 strands of cross stitch thread can be worn)

16#(Needle thickness 1.6mm, about 4 strands can wear cross stitch thread)

  the total length of the needle is about 4.4-4.8cm. The thickness of the needle refers to the outer diameter. The measurement error is ± 0.02. The numerical value is for reference only, if there is any non-smooth place at the needle hole, you can use fine sandpaper to polish it.

  If there is a place where the needle hole is not smooth, you can use fine sandpaper to polish it,
[Usage] the poking needle is thicker than the needle we usually use and is hollow, beside the needle
A needle hole, the thread goes in from the hollow, and then comes out from the small eyes below, you can stamp the cloth.

Special note: the color of the plastic part of each replenishment may be different, please be careful if you mind