Wood Grain 7-Color Lighting Humidifier.

The product is equipped with a touch switch, touching it once will turn on the fog and lights, touching it twice will turn off the lights, and touching it three times will turn off everything.

Product size: 110*110*115MM

Material: ABS

Power Input: DC5V.500MA

Weight: 207G

Packing Size: 112*112*120MM

Packing Quantity: 60 pieces

Packing Size: 47*37*50CM

  Operating Precautions:

 Please add pure water or distilled water to the tank, not tap water or dirty water.

     Do not add hot water above 40°C to the tank, or the color may fade or the shape may deform.

 Do not allow water to flow into the machine from the atomization plate; if there is water outside the water tank, please wipe it clean with a dry cloth.

 When the indoor temperature is below 0°C, please drain the water from the tank to prevent the components from being damaged when the water freezes.

 Please do not put metal products, chemical substances, detergents, etc. into the water, otherwise, there will be poor fogging phenomena;

 When the tank is full of water, please do not move it at will, or the water will overflow and enter the machine to damage the product.

     Please do not place the humidifier in a place where strong light or direct heat radiation exists.

 Do not place the humidifier near the air vent and try to keep it away from furniture and electrical appliances.

  *Please do not directly add water to the machine's water tank.

  * Please disconnect the power and unplug the plug when not in use for a long time (this product does not require grounding);

  *When the tank is full, it can be used continuously for 6-7 hours without the need to add water;

     Please do not touch the USB connector with wet hands, to avoid poor contact and electric shock.

     * Do not use for a long time when the body is tilted.

     * Do not touch the atomization film during the power-on process.

     * Do not disassemble the body until the power is turned off, to avoid damaging the product.

     * First time use or after a long period of storage, add water for 2 minutes before turning on the machine to ensure that the cotton swabs are fully soaked.

    * When adding water, please use a container to pour the water into the center, do not add to the atomization film, the product edge and overflow, to avoid damage to the product;

 Cotton swab replacement

      If during a long-term use, the mist output becomes smaller, and the surface of the atomization sheet remains clean, the cotton swab has changed color and hardened, it is necessary to replace the cotton swab. The method of changing the cotton swab: rotate the lid on the atomization sheet to the left, gently pick up the atomization sheet and stand it upright, remove the cotton swab and replace it, then reset the atomization sheet, and then rotate the lid to the right to install it.

  Maintenance and Cleaning

 After using the product for a period of time, if the mist volume becomes smaller, you can use a cotton swab to gently wipe the surface of the atomization film from the spray hole with a small amount of vinegar, until the mist volume returns to normal.

      During the use process, if it is found that the surface of the atomization film has water droplets or a water film that affects the spray effect, you can use a dry cotton swab to gently wipe the surface of the atomization film. Do not touch the atomization film with hard objects to avoid damaging the machine.

      ~: Cleaning of the tank (once a week), if there is scale in the tank, use a soft cloth to wipe with a small amount of vinegar, and clean with water;

  Humidifier Collection

  ~: When not used for a long time, clean it thoroughly, dry it, and then put it back into its original packaging box to store it in a dry place.