Factory Wholesale Self-Adhesive Sponge Wheel Polishing Sponge Ball 150mm Polishing Wheel Sponge Roundel Polishing

Pay attention to the following problems when polishing and waxing: [pay attention to model price when purchasing]]

1. The waxing operation environment is clean and well ventilated. If necessary, a special waxing workshop can be set up.

2. The car should be waxed in the shade, otherwise the temperature of the car watch will be high, and the adhesion ability of the car wax will decrease, which will affect the waxing effect.

3. When waxing, the running route of manual sponge and waxing machine sponge should be straight reciprocating, and it is not suitable for annular smear to prevent strong annular diffusion caused by uneven coating.

4. Waxing should follow the principle of first up and then down, that is, first smear the roof, front and rear cover, side of the car body, etc.

5. When waxing, if the sponge has the same color as the car paint, it may be that the paint surface has been damaged, stop waxing immediately and repair it.

6. The polishing operation should be carried out within the specified time after waxing is completed, and the polishing movement is also straight reciprocating. Unpolished vehicles are never allowed to drive on the road. Otherwise, polishing will easily cause scratches on the paint surface.

7. After polishing, carefully check and remove the remaining car wax from the license plate, car lights, door edge, etc. to prevent corrosion.

8. After waxing, the equipment and supplies should be properly cleaned and kept properly.

9. To master the frequency of waxing, due to the different driving and parking environments of the car, the waxing interval cannot be followed step by step, but you can wipe the paint surface of the car body by hand. If there is no sense of smoothness, you should hit it again.