export plate closed temperature control electric furnace 1000w mosquito coil disc plate electric heating furnace universal experimental electric furnace

Warm Tip:

Dear friends, electric heat stoves are not picky about pots. In theory, any pot with a flat bottom and high temperature resistance can be used. However, because the temperature control test of the electric heat stove is the temperature of the heating plate surface, thicker pots (such as casseroles, stone pots, ceramic pots, earthenware pots) may not be boiled in one go, that is, before boiling, the power indicator light has been turned off (there is a time difference in temperature conduction). Then wait a little bit and it will start working again, which will cause the boiling to be a little slower. The power light goes out when the water is not boiled, not because the electric heat stove is not working, but because the over-temperature protection device is at work, and there is a time lag from the heating plate to the pot.
Once the temperature reaches a certain level, the device will automatically turn off, but the heating plate will continue to heat up, thus protecting the electric stove and saving electricity. This phenomenon may occur occasionally during use. Of course, the water will continue to heat until it boils. The first time you use it, there may be a small amount of smoke, but after a few uses, it will disappear. If you are using a metal pot, such as iron or stainless steel, the heating will be very fast, and the effect will be great!

Product Name: Electric Heating Stove

Product model: SL-1010

Voltage"220-240V/110-127V 50/60HZ 1000W

Product Size21X21x7.5CM

Heat pipe size: φ155 mm

Material: Thickness of cold-rolled plate0.4mm

Iron sheet thickness: 0.4mm

CertificateCE(EMC/LVD) ROHS

Packing:Plastic bags, no foam 

Packing Quantity: 12TaiwanSlashbox

Gross Weight/Net Weight: 15.5KG/15KG