2 t horizontal jack hydraulic jack portable jack car jack 2吨卧式千斤顶液压千斤顶便携式千斤顶汽车千斤顶

2-ton horizontal hydraulic jack series

NO.1 Before use, ensure the rear screws are tightened to prevent the jack from sliding down during operation.

NO.2 When using it, be sure to park the car on a flat surface and tighten the handbrake or foot brake. Otherwise, if one wheel lifts up, the other three wheels may move, which could cause danger. Therefore, when using a jack, always park the car on a flat surface and secure the handbrake or foot brake.
Note: After lifting the vehicle with a jack, it is essential to use a jack stand to support the entire vehicle. The jack is only used to raise the body; sometimes the jack may lose pressure, which may not ensure your safety.
Maintenance of hydraulic horizontal jacksThe hydraulic jack, also known as “oil pressure jack,” uses oil as the medium. Therefore, it is essential to maintain the oil and the device properly to prevent clogging or oil leakage, which could affect its performance. For new or long-term unused hydraulic horizontal jacks, there may be a small bounce in the piston rod when first used due to excess air in the cylinder. The oil pressure jack can be moved back and forth without load 2–3 times to remove the air from the cylinder.