X Email Mobile
600mah 18cm induction model: 1
|
¥23.0 | 999999 piece available |
|
350ma 10cm sensor type: 1
|
¥17.0 | 999999 piece available |
|
350ma 10cm button model: 1
|
¥13.0 | 999999 piece available |
|
800mah 28cm induction model: 1
|
¥26.6 | 999999 piece available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Yiwu benhang Trade Co., Ltd 5yr.
Main Products:Decorative crafts
Contacts:AlinChat
Mobile:86-18258994040
E-mail: WeChat:A18258994040
Address:7274 A, 2 Street, 3 F, 9 Gate, International Trade Mart (District 1).
Related items
| P10 Induction Light Technical Specifications | |||||||
| Product Number: | PR210304A | Test date: 20210625 | Testee: | ||||
| Test Conditions | Environmental temperature: 25°C Humidity: Indoor: √ Outdoor: Daytime: √ Night: | ||||||
| Test Equipment | Multimeter: Victory 86E, Light Meter: TA8124, Power Supply: DPS-305BM, Integrating Sphere: PHOTO-2000J | ||||||
| Test Project | Function Parameters | Remark | |||||
| Sensing Distance | 3-5米 | ||||||
| Inductive angle | ≤110 degrees | ||||||
| Induction delay | 20S | ||||||
| Start Light | 1-10 LUX | ||||||
| Button Function | Five-level function: 1. Single click to sense and illuminate with white light, double click to keep the light on, long press to adjust the brightness; 2. Single click to sense and illuminate with natural light, double click to keep the light on, long press to adjust the brightness; 3. Single click to sense and illuminate with warm white light 1, double click to keep the light on, long press to adjust the brightness; 4. Single click to sense and illuminate with warm white light 2, double click to keep the light on, long press to adjust the brightness; 5. Single click to sense and illuminate with yellowish light, double click to keep the light on, long press to adjust the brightness. The above button steps can be cycled to select the required light source. | ||||||
| Power-on | Turn on the product under an environment with light flux ≥ 10LUX, and the light control function will be activated. After the light is on for 5 seconds, the product will enter a dormant state. | ||||||
| The product enters the automatic sensing working state when powered on in an environment with light flux ≤ 5LUX. | |||||||
| Power supply | 3.7V/600mAh polymer lithium battery with built-in protection | ||||||
| Charging Input | Input DC5V | ||||||
| Charging Current | 500mA | ||||||
| Charging indicator | Charging with red light; when fully charged, the red light goes out and the green light comes on. | ||||||
| Switching Current | Red light always on to green light, current 60mA | ||||||
| Standby Power Consumption | 4.2V/25uA | ||||||
| Working temperature | -10℃-45℃ | ||||||
| Highlight the maximum parameter value (mA/LM) | |||||||
| LED Load | Gear | 1 | 2 | 3 | 4 | 5 | |
| light source | white light | Natural light | Warm White Light 1 | Warm White Light 2 | Bias Yellow Light | Naked light parameters | |
| 3V Low Bright | 3.74/1.4 | 3.0/1.0 | 3.0/1.07 | 2.97/1.06 | 3.8/1.4 | ||
| 3V Highlight | 29/12.9 | 22.3/9.7 | 23.0/10.0 | 22.5/9.9 | 29.0/13.0 | ||
| 3.7V Low Brightness | 8.9/3.5 | 7.1/2.73 | 7.1/2.72 | 7.0/2.7 | 9.0/3.73 | ||
| 3.7V High Bright | 75/32.4 | 57.6/24.9 | 57/24.5 | 56.8/24.3 | 76/34 | ||
| 4.1V Low Brightness | 12/4.8 | 9.4/3.7 | 9.4/3.8 | 9.2/3.5 | 12.2/5 | ||
| 4.1V High Bright | 102.5/43.6 | 78.6/33.9 | 78.5/33.5 | 78.7/33.7 | 103.5/43.8 | ||
| Discharge duration | white light | Constant brightness discharge ≥ 8 hours, induction times ≥ 1400 | |||||
| mixed light | Constant brightness discharge ≥ 10 hours, induction times ≥ 1800 | ||||||
| Warm white | Constant brightness discharge ≥ 8 hours, should times ≥ 1400 | ||||||
Update time：
TOP
