304 Stainless Steel Fire Access Lock Double Open Escape Door Lock Lower Pressure Piston Type Push Lock One-Way Fireproof Door Lock

Elimination anti-escape door lock: also known as fire door Push Lock fire safety door lock escape lock fire push lever door lock fire control lock, has been widely used in hotels, large shopping malls, hospitals, banks, commercial office buildings, factories, municipal buildings, etc, solve the needs of each unit for fire inspection and acceptance. Install Fire door Push Lock fire protection fireproof door lock steps: 1. Width from door edge to door frame edge, first determine the total length of the lock. 2. Drill holes according to the installation hole drawing. (Note: the center line of the lock body to the bottom of the door leaf is 1000mm.) 3. Install the lock body, first remove the outer cover screw, align the bottom cross switch of the lock body with the lock head opening piece; Then fix the lock body with the lock body screw, then press the tail end fixing piece to the lock body and tighten the tail fixing screw; finally, put on tail hood and tighten tail Hood screws. Product Description: In recent years, fire accidents caused by mass casualties in China have occurred from time to time. A common lesson is that safe evacuation passages are blocked by security doors and burglar mesh, causing people to escape without doors when fires occur; Fire fighting and rescue again and again, the security doors and inside corner windows must be removed before the trapped personnel can be rescued, and the opportunity to put out the fire is missed. The fire door Push Lock fire alarm escape door lock, which is planned to be popularized and applied by the municipal fire brigade in 13 years, is expected to properly solve this problem. Fire push lock is a widely used entrance and exit controller with strong structure, which prevents outsiders from entering the interior without permission and allows internal personnel to go out freely in case of emergency, when used without permission, a high-decibel alarm will be issued, and it can only be stopped and restored with a key. There is a mechanical key configuration position for the entrance of the Channel Lock, the access lock (outer lock cylinder) can be provided as required. Fire door Channel push lock is mainly used to protect emergency exits, shipping and receiving doors, security doors, internal access doors, etc. Currently, it has been widely used in airports, command centers, hotels, convention centers, large shopping malls, hospitals, supermarkets, public transport systems, banks, securities, commercial office buildings, factories, Biotope, municipal buildings and government agencies, etc. Fire escape lock self-luminous logo can ensure personnel to quickly identify in the dark, saving escape time. ① the door lock can be opened only by pushing (pressing) the bar with hands or any part of the body ② it has automatic locking function after closing the door every time: it not only effectively prevents unqualified personnel from entering the interior of the building from the escape passage, but also ensures that the personnel in the building can easily enter the escape passage, therefore, the safety and escape function of the building are improved and guaranteed. ③ user-installed "channel management" function: in order to facilitate the different requirements of unified management of buildings, this product can be set as normally open (channel) by the manager with special tools. Status or normal lock status-push the push lever door lock actuating lever, rotate the inner lock head counterclockwise with the special tool attached to the product, lock the bolt in the normally open state (Bolt retracted); Turn the inner lock head clockwise, the Bolt can be reset to form a normally locked state. The above settings do not have to worry about misoperation or intentional behavior of non-managers due to the reasonable structure of the product itself. Product Type: single open and double Open. In addition, push rod escape door locks are divided into alarm and no alarm functions. 1. Applicable to emergency exit door, fire doors and fire access doors with dense flow of people. 2. Easy operation, large pressure area of the push rod and emergency escape, the push rod can quickly open the door leaf by external force. 3. The door opening force is light, and the door can be pushed open when no more than 67N force is applied perpendicular to the surface of the push rod, meeting ANSI standards. 4. After a long test, it still meets the design function and the parts are not damaged. 5. The surface of the parts has strong corrosion resistance, and the product performance is sufficient to meet the requirements of various institutes. It is used in high traffic applications and can maintain considerable anti-theft performance, thus ensuring life safety and property safety. The length of the lock is 65-100cm, and other lengths can be cut. The factory with the bolt is equipped with the lock cylinder, and the factory of the lock is not equipped with the lock cylinder. If necessary, please contact customer service.