Antique Copper Lock Welding Vintage Lock Retro Chinese Style Small Lock Lateral Opening Padlock Vintage Latch Lock Engraved Embossed Lock

Shopping Guide tips!!!

1.【 spacing] is the distance between the lock (the distance between the lock lever) when selecting measure the distance between the outermost side of the two door latch or box buckle holes and select the spacing of the corresponding lock OK, and your keyhole cannot be less than the diameter of the lock Rod (the thickness of the lock rod)

2. There are still some antique locks deficiencies. It is only favored by consumers as a decorative lock, because although antique locks have the function of locking, their anti-theft performance is not strong., and it is relatively cumbersome to use compared with other common padlocks. Some consumers are not good at using it, and the family uses it very little. Side Lock has relatively high requirements on anti-theft and use efficacy. Please be careful when ordering.       

3: by default, a lock has a key. The key is universal. You can contact customer service to buy more.

Every lock is hand-made and there will be some color difference, please know

notice to buyers: feel your support for this product. To avoid misunderstanding during communication, please read carefully!

About products: Products are taken in kind. All products have detailed sizes, materials and accessories. Please check carefully!
About delivery: If the inventory is sufficient, the customized goods will be delivered within 1-2 days and about 10 days. If you have special requirements, please contact Customer Service or call!
Mode of despatch: express delivery and logistics are optional. Thank you for your support!

Note:

1. Do not use thinner, sulfuric acid or acid solution to wash the surface.

2. Do not use a polishing machine to polish this product.

3. Do not change the hole spacing of the product casually to avoid damage.

4. Do not change the parts of the product at will to avoid damage to the product.

5. Please use it according to the load bearing of the product to avoid losses caused by overburden.

6. If the product is to be welded, please use the blank product for operation to avoid burning the plating layer at high temperature.
[Storage method] store it in a dry place, and do not pile it up in a damp or cold place to avoid rust or oxidation of the product.