|

【Usage Instructions】 Fix the top part of this steering wheel cover, hold one side tightly, then gradually install the remaining parts securely. Complete the entire installation from the bottom, and make appropriate adjustments—do not pull forcefully!
Cleaning Method: 1. Use a soft animal brush to remove surface dust and dirt. If the contamination is severe, use an eraser to gently spread the dirt evenly in all directions. 2. Once a week, dampen a dry towel with water and wring it out; repeat this process several times for gentle wiping. 3. If there are stains on the leather surface, use a clean, damp cotton pad dipped in warm detergent to wipe it, then let it dry naturally. You can test it in an inconspicuous corner before using it officially. 4. After sprinkling the drink, immediately dry it with a clean cloth or cotton pad, then wipe it with a damp cloth and allow it to dry naturally. Do not use a hair dryer to dry it. 5. If it has just been coated with oil, it should be wiped clean immediately with a dry cloth. Any remaining oil should dissipate naturally or be cleaned using a special care product for sanded leather; do not wipe it with water. Installation Instructions: 1. Place the upper part of the steering wheel cover on the top of the steering wheel, hold it in place, and gradually pull it downward on either side with both hands. 2. When the steering wheel cover is difficult to secure, have another person pull it downward to the appropriate position. 3. After the installation at the bottom of the steering wheel is completed, it should be in a proper state where it is secure and does not slide. A slight adjustment is required before the installation is finished.
|