Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
pink: new cup (6-leaf plastic cup body 3.7v)
粉色:新杯(6叶塑料杯身3.7V) |
CN¥ 0.0 |
green: new cup (2-leaf plastic cup body 3.7v) starting from 1000
绿色:新杯(2叶塑料杯身3.7V)1000个起 |
CN¥ 0.0 |
pink: 4-leaf plastic cup body 3.7v
粉色:4叶塑料杯身3.7V |
CN¥ 0.0 |
blue: new cup (2-leaf plastic cup body 3.7v)
蓝色:新杯(2叶塑料杯身3.7V) |
CN¥ 0.0 |
purple: 4-leaf glass body 3.7v
紫色:4叶玻璃杯身3.7V |
CN¥ 0.0 |
Yiwu Lihong household products Co., Ltd 5yr.
Contacts Weng Lijian Chat
Mobile 18258988509
WeChat LH15868963280
WhatsApp +86 15958902839
Portable third-generation juicer, available in four colors, can have a custom logo, with a minimum order of 150 units.
Product Name: Portable Electric Juice Press Cup
Function: Juice extraction, mixing
Product material: food-grade PC material + food-grade rubber sealing material + 304 stainless steel blade head
Specifications: 7.5*7.5*23 cm (3.7V size with 2/4/6 leaves) Net weight: 457 grams, 380 ML
7.5 * 7.5 * 25 cm (6 leaves, 7.4 V size) Net weight: 655 grams, 400 ML
Product packaging: Juice cup + colored box packaging
Packaging quantity: 30 PCS
Outer box dimensions: 5.3 × 4.5 × 2.6 cm
Precautions for juice cups:
1. Charging: A red light indicates undercharge, while a blue light indicates full charge. After charging, please disconnect the charging cable, as the juicer does not function during charging. It is recommended to charge it for the first use; otherwise, there may be insufficient power or no operation.
II. Tightening: The cup body and base must be tightened before rotation can occur, as there is an invisible protective switch between them. Only when the cup body is tightened can the convenient operating mode be achieved, and the motor will start working.
III. Fruits: Fruits must be cut into small pieces of 1.5 centimeters.
IV. Adding Water: The hot water temperature should not exceed 60℃. After adding the fruits, half of the amount of water or milk required for the fruits must be added. Do not use dry pressing, as it may damage the motor. (Unless the fruit has a high moisture content, such as watermelon, in which case no additional water is needed.)
5. Switch: Be sure to tighten the lid of the juicer cup and invert it so that the blade is exposed to the air. Turn on the switch (otherwise, the blade may get stuck in the fruit and stop rotating). After inversion and activation, shake it at about 45 degrees for better juicing results.
6. Leakage: Please check whether the silicone seal is properly installed, and reinstall the seal.
7. During cleaning, the cup body and lid can be removed for washing, but the base should not be placed in water to prevent water entering and damaging the components inside.
8. Juicers must not run idle to prevent overheating that could damage the motor and seals.























Update time:
TOP