applicable to 2019 weichi-abs black carbon fiber pattern smart version door handle handle decorative parts

Installation Method:

1. Surface cleaning. The adhesive surface must be kept absolutely clean and dry. General cleaning can be done with a cloth soaked in a 50% solution of alcohol, isopropyl alcohol, acetone, or toluene. After the surface has been cleaned with a solvent, it must wait until the solvent has completely evaporated before adhesive can be applied.

2. Product adhesive, before adhesive product, you must adjust the product to the required installation position, and then tear off the red film to paste. When operating, avoid contact between the fingers and the adhesive surface. After the product is pasted, it must be pressed firmly to ensure full contact and moisture of the adhesive surface.

3. After the product and parts are pasted, they should not come into contact with water or large amounts of dust for 24 hours to achieve better bonding strength.

Please choose a sunny day for installation. Make sure to thoroughly clean the adhesive position with a cleaner before installation and press firmly for a while. Do not wash the car within 2 days. If it's a colder weather, use a hair dryer to slightly dry it to maintain the softness and adhesive properties of the adhesive.