downHere is an introduction to the production process and precautions for the gold and silver thread:

Step 1: Coloration: Mixing the dye with the resin and solvent to coat the surface of the electroplated film.

Step 2: Cut the raw material into small rolls of different widths according to the specifications required for the silver and gold filaments for stripping.

Step 3: Cutting into strips: Cut the large pieces of raw material into small rolls, then cut these rolls into various numbers of finished or semi-finished silver and gold wire products.

Step 4: Spinning the yarn: Unwind the yarn from the original paper tube and wind it onto an electric wood tube suitable for ply twisting.

Step 5: Twisting: Twist the M-shaped silver and gold filaments together with the semi-finished yarn to form H- and X-shaped yarns.

The sixth step: Embroidery thread: Twist the M-shaped gold and silver filament with a single piece of artificial silk or polyester filament to create L- or J-shaped yarn.

Step 7: Steaming: Place the MH and L&J type silver and gold filaments in the steaming basket and send them into the steaming boiler for high-temperature shaping to prevent further spinning.

Step 8: Tubes: Transfer the ply yarn from the aluminum tube to the tube paper tube. The series for gold and silver threads are also known as gold and silver onions, gold and silver threads, embroidery threads, and so on. The products are processed into soft, colorful gold and silver threads (gold and silver threads) by vacuum coating aluminum, coating, and coloring, covering the M type, MH type, MX type, MS type (computer embroidery thread) and other four series. Rich colors: There are: rainbow (rainbow), laser, light gold, deep gold, green gold, silver, gray silver, red, green, blue, purple, snow green, black, and so on. The products are widely used in weaving trademarks, yarn, knitted fabrics, warp knitted fabrics, woven fabrics, embroidery, socks, accessories, crafts, fashion, decorative fabrics, ties, gift packaging, and so on.

Use gold and silver thread:

 1. When used with gold and silver threads, it must be carefully washed with water, dried, and completely neutralized before use. (Special attention should be paid to woolen and cotton fabrics).

2. The dyeing process for nylon and synthetic silk fabrics is similar, but they cannot be dyed for woolen fabrics, high-pressure dyeing, refining, or bleaching processes. In these cases, production must be specially ordered.

3、Must pay attention to excessive tension.

4. When you want to dye the product, discuss it with the manufacturer in advance.

5. When there is a problem with the yarn, contact the manufacturer as soon as possible.

 High-temperature treatment test table for gold and silver threads: Warm ironing at 135°C for 15 minutes Dry heat at 180°C for 60 seconds Acid treatment with 0.2% acetic acid at 65°C for 30 seconds Hot water treatment with 0.5% soap water at 65°C for 30 seconds Friction for 10 times Dry cleaning with trioxane and light gasoline at 25°C for 30 minutes Alkaline treatment with pure soda at 2g/L at 65°C for more than 30 minutes

Supply Instructions:

1. The prices on the internet are not always the actual prices. The listed prices are only for convenience and to facilitate purchases. For processed products, the actual prices vary depending on the specifications, quantity, and techniques required. For an accurate quote, please specify the specifications, quantity, and techniques. If you make a purchase without specifying these details, we will not ship the goods. Thank you for your cooperation!

2. We welcome you to provide your own samples, and we can custom-make them based on your requirements. Samples with special specifications and demands require a deposit.

3. Regarding shipping fees, we will charge [actual shipping cost] based on the quantity of products purchased by customers. We will charge the same amount as the courier or logistics company, and we will not charge more than the actual cost. We hope that you can understand!