Product Name and specification
hot melt glue gun 20X18cm
hertz power
50-60Hz 110-240V
instructions
1. Put the bracket up and turn on the power switch before use. Press the indicator light up and turn off when the work is opposite.
2. Insert glue stick into the rear of glue gun and pull the trigger several times to enable glue stick to completely enter the inside of the hose
3. Let glue gun warm up for 2-3 minutes before use
4. Pull the trigger until the glue flows out of the gun nozzle
5 The power-on glue gun must be cut off after stopping for 15 minutes to avoid over cemented
6. Turn off the power supply after use without cleaning the gun nozzle
7. Do not pull the remaining glue stick out of the hose