X Email Mobile
| Mixed Batch | ¥0.0 | 6999 pcs available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Yiwu YuManOffice Supplies Firm 13yr.
Main Products:Banknote counting machine,shredder,sealer,plastic sealing machine. Business and supermarket equipment: cash register,receipt printer,barcode printer,scanner,money box,cash box,safe
Contacts:Fameda ZChat
Mobile:86-13076754351
E-mail: WeChat:13076754351
Address:25213 , 13 Street, 2 F, 62 Gate, International Trade Mart (District 3).
Related items
Compared to other sealing machines, the hand-press type sealing machine is not only compact and convenient to carry, but also relatively simple to use.
The hand-press type sealing machine does not require a power switch when in use. Simply plug the AC power cord into an outlet, and adjust the thickness of the material to be sealed based on the desired sealing thickness.
Adjust the heating time. Place the plastic bag on the sealing surface, press the handle, and the circuit will automatically control the heating time.
When the sealing machine indicator light goes out, the power is automatically turned off. After about 1-2 seconds, release the handle, and the sealing will be completed.
If the heating time is too short, it may result in an unreliable seal. You can rotate the sealer dial clockwise to extend the heating time.
Time.
If the sealing joint breaks when sealing, it is usually due to too long of heating time. At this time, only
You must rotate the knob counterclockwise to shorten the heating time. If the plastic bag sticks to the rubber press plate, it means the cooling process was insufficient.
Insufficient time, extend the cooling period after the indicator light goes out. Please wait a moment before releasing the handle.
After the heating time is set, it should be maintained unchanged during use. There is no need to make any adjustments when using it continuously.
You can always plug the AC power cord into the power outlet, and it will not consume electricity when not connected. The SF-200B has a typing function, and if not
If you need to type, flip the rubber mat over to use it.
If the insulation tape underneath the electric heating belt is damaged, it can cause a short circuit and damage the electric heating belt. Therefore, it is necessary to replace the insulation tape after each installation.
When replacing the electric heating belt, check the condition of the liner. If there is any damage, replace it with a new one. When replacing the electric heating belt is necessary, choose one that meets the specifications.
Please check the like-sized adhesive press plate after a long-term use with the same specifications as before.
Update time：
TOP
