Kitchen Faucet Hot and Cold Pull-out Washing Basin Sink Telescopic Laundry Tub 304 Stainless Steel Multifunctional Faucet

Common sense of daily maintenance of faucet:
1. When installing the faucet in the new house, the sand and stone impurities in the pipeline must be drained first. So as not to block and affect the water.
2. High-grade faucet must be installed by experienced and qualified professionals. During installation, the faucet should not bump with hard objects, and cannot touch cement, glue, paint and other objects with abrasion, corrosion and corrosion on the surface of the faucet.
3. After the faucet is used for a long time, the water output may decrease. You can use special tools to unscrew bubbler, clean the filter screen and install it back carefully.
4. Light opening and light closing are especially important. Any reckless and deliberate behavior may damage the seal of the faucet and lead to failure.
5. The faucet should always be wiped with soft cotton and clean water to ensure that the faucet is bright. Try not to clean it with cleaning solution, and absolutely do not use corrosive acid-base solution.

(1) mirror chromium
(2) high density zinc alloy handle
(3) red and green water temperature indication
(4) splash-proof foam water-saving system
(5) Non-slip Street connecting base
water outlet with unique bubble filter, which makes the water flow softer and won't splash water.
The alloy handle is made of high-density alloy and is integrally formed to make it more textured.
The copper material is very good, deoxidation and dealumination treatment, surface layer multi-layer polishing and electroplating treatment, super bright and delicate
the rich three-dimensional sense, strong outline and unique domineering style of the Emperor will never fall behind, which is suitable for all interior design styles.
Widen and thicken install brass inserts, easy to install. Firm. Hand rotation is also acceptable.
The small handle is as bright as a mirror, indicating that the "bright" technology electroplating of the water workshop is not comparable to ordinary taps.
Intended.
Faucet purchase method:
look at the appearance
the chrome plating process on the surface of a good faucet is very particular, which can only be completed through several processes. To distinguish whether a faucet is good or bad depends on its brightness. The smoother and brighter the surface, the better the quality.
Turn handle
when the good faucet turns the handle, there is no excessive gap between the faucet and the switch, and it is easy to close and open without any resistance and slip. But the inferior faucet not only has a large gap, but also has a large sense of obstruction.
Listen to the sound
the material of the faucet is the most difficult to distinguish. The good faucet is cast copper as a whole, and the sound is dull when it is knocked. If the sound is very crisp, it must be stainless steel, and the quality will be worse.
Identification mark
if you really can't distinguish, you can choose a more formal brand. Generally, regular products have brand logos of manufacturers, while some informal products or some inferior products are usually pasted with some paper labels, even without any marks. You must pay attention when purchasing.


Faucet leakage water treatment method:
in normal life, sometimes I find that the water of the faucet still drips after tightening, and drips continuously from the outlet of the faucet or the joint, which not only causes a lot of waste, sometimes its noise will also cause some troubles. In fact, the structure of the faucet is very simple. You can repair the leakage by yourself. Generally speaking, the leakage problem only needs to be replaced with a seal types of parts such as the axis gasket or triangle a seal inside the faucet, it can be solved. However, you have to turn off the main tap switch at home before renovation.
As for the repair of water leakage at the faucet joint, the cause of water leakage is nothing more than the sealing tape damage of the faucet part (fixing screws). Therefore, just use the plate pliers to remove the faucet and re-roll the new sealing tape at the place where the screw is fixed. The following are the maintenance steps: first, tie the faucet tightly, turn the faucet counterclockwise with a plate clamp. Second, put the tapping hole outward and roll it 5-6 times with wind-printed tape clockwise on the thread part.
Check whether the faucet has been adjusted. The water clamp is tied in clockwise directions. After the installation is completed, turn on the main switch and try to check whether there will be water leakage.
Even if the faucet is tightly tied, the reason why it still leaks is:
1. The reason for the water outlet leakage: it is caused by the wear of the Axis gasket in the faucet. Use pliers to loosen the gland and remove it. Take out the axis gasket with a clip and replace it with a new axis gasket.
2. The reason for the leakage of the gap in the lower part of the faucet tie: it is caused by the abrasion of the triangle a seal in the gland. You can loosen the screw and remove the bolt head, then loosen the gland and remove it, then take out the triangle seal shop inside the gland and replace it with a new one.
3. Leakage at the joint of the connecting pipe: Generally speaking, the cap nut is loose. At this time, you can re-tighten the cap nut or replace it with a new U-shaped a seal.
If the faucet is found to have less water, it may be leaking, because the water stop disk of the single faucet gets stuck with sand and gravel. This phenomenon is still to find a professional maintenance engineer to disassemble the faucet and clean it up, however, if rubber mat is damaged, it must be replaced. Generally speaking, the correct use of the faucet means that do not rotate the faucet too tightly. The sauce faucet can last for 7 or 8 years at rubber mat,, the faucet of the hot water part is easy to reduce its service life under the heat expansion and contraction, so it is usually recommended that the rubber mat on both sides of the hot and cold should be replaced regularly at the same time.
Faucet maintenance method

faucet plays a very important role in sink accessories. Many consumers leak faucet due to improper use and lack of maintenance awareness, which brings a lot of inconvenience to kitchen life. In fact, as long as installation, use, the maintenance is correct, the actual service life of the faucet can last for a long time, and it can keep bright as new all the time.

1. Uneven water outlet or small water outlet: it may be because the tap the mouth of the Nets (water outlet or bubbler) is blocked by the mouth of the Nets due to water quality problems. The solution is: take out the mouth of the nets of the water outlet, just clean it with a waste toothbrush; Another possibility is that impurities block the water hose of the faucet. The solution is: take out the water hose and clean it.
2. Can't shut down the water: there must be something wrong with the valve core. You can take out the red and blue mark, remove the faucet handle with the inner hexagon tool, and replace the valve core (this is usually handled better by professionals or manufacturers).
3. The chrome coating on the surface of the faucet turns into flowers or water mist appears: the method is to wipe off the water with a dry cloth, and wash it with vinegar seriously.
Special note: do not scrub the faucet surface with steel wire ball!

4. When you switch the faucet, be careful not to use too much force, as long as you rotate it gently, don't think that if you don't twist it hard, the faucet will leak and cause waste. In fact, it is not, even if it is a traditional faucet, don't spend a lot of effort to twist it to death. If it lasts for a long time, it will accelerate the damage of the valve core in the faucet. Especially, don't use the faucet as a handrail to support the body, other heavy objects or use it, in order to avoid leakage caused by excessive loose load.

Buyer Guide:
(1) the faucet sold is directly supplied by the manufacturer, please rest assured to order
(2) If you encounter relevant parameters (shape, size, purpose, materials, color, weight, etc.) please be sure to contact us before ordering.

Seller reminder: two angle valve and two 60cm hoses are required for installation

undefined
1. About payment
our store supports Alipay online secured transactions, making transactions safer. Customers who do not have Alipay can contact customer service for details. The bank can make payment and arrange delivery.
2. About delivery time
after the order is generated, the delivery is usually arranged in about 3 days. Please wait patiently. The warehouse will carefully inspect and distribute the goods, and try to arrange delivery for you at the first time.
3. About express delivery
the wholesale price of our factory is tax-free, without express delivery or logistics. We recommend that you choose logistics to deliver large products, and the logistics cost is paid on arrival. For small sample products, you can choose express delivery (default Huitong). For more information, please contact customer service to modify the freight.