Fine Atomization Nozzle uses brass main body with stainless steel core Baffler inside. Liquid forms a centrifugal vortex in Baffler, and fine hollow fog particles are sprayed from the spray hole, which can be widely used in factory humidification, artificial fog such as cooling, disinfection, dustfall, landscaping, salt spray test, etc. This kind of nozzle nozzle hole is punched with precision puncher, and the aperture is 0.1 mm-0. Between 8mm, well-made.

This series of nozzles do not need air assistance, the system device is simple, the spray point is fine, the atomization is sufficient, energy saving and water saving, the cost is low, and the effect is good; The stainless steel wafer is processed by advanced forging process, and the durability is strong.

This nozzle can completely use the pressure of tap water for atomization.

[Scope of application]]

1. Wetting and derusting 2. Air humidification 3. Chemical treatment 4. Chemical spraying 5. Liquid spraying 6. Tobacco leaf humidification 7. Tablet coating 8. Flue gas evaporative cooling 9. Sterilization and disinfection 10, parts cooling 11, fruit wax spray 12, ceramic tile glazing 13, workshop humidification 14, salt spray test 15, artificial fog 16, humidification in other places, etc.

[Main part material] brass, stainless steel

[Wafer material] Ceramic, stainless steel

[Nozzle color] yellow, silver (electroplating)

[Specification parameters] only 3, 4, 5, 6 and 8 low-pressure nozzle can be used, and the corresponding nozzle aperture is 0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm.