Enamel Pot Cast Iron Thickened Dual-Sided Stockpot Pot Set Enamel Pan One Piece Dropshipping Manufacturers Support Fixed Z

Due to different measuring tools and techniques, the measuring size may have an error of about 1-2cm. Please understand! Enamel pot the color of each batch of production will be slightly different, which is purely normal.

Please contact customer service for details, thank you

because measurement method and tool not the same, the size will be have a little difference.

Material and maintenance

Material and maintenance

enamel pot precautions:

1. When using this product for the first time, wash it carefully with warm water and neutral lotion.

2. Daily use of neutral or special lotion.

3. Avoid sudden changes in temperature. When the temperature of the cookware is high, it is not easy to pour cold water immediately or put the pot in cold water to prevent the enamel layer from falling off.

4. Avoid excessive heating. This product has good thermal conductivity, and high temperature heating will cause the pot body to be heated excessively. It is recommended to use medium and low fire heating.

5. Please wipe it clean as soon as possible after use and put it in a ventilated place. Do not put it in a damp place for a long time.

6. Excessive bump is strictly prohibited to prevent enamel layer damage.

7. Try to use wooden or silicone spatula, avoid using metal shovel and steel wire ball, so as not to scratch enamel and affect the service life of the pot.

8. Enamel pot because sand molds are used for casting, when molten iron is poured into the molds, a large amount of gas will be generated, so the finished products may produce sand holes and other conditions. Enamel pot layers are sprayed upside down, so some parts of the pot edge show silver gray iron, which is not a quality problem! After cleaning, you can apply vegetable oil at the pan to prevent rust.

9. The pot cover of the modeling pot is a complex irregular structure, and uneven gravity will be generated during the firing process, resulting in a certain gap between the pot body and the pot cover, which is normal, does not affect the use,

  please rest assured. If you mind the above situation, please choose carefully!

1. First time use this cookware, choose warm water add some Neutral detergent to clean.

2. In daily life use Neutral detergent or Dedicated detergent to clean, can keep cast iron cookware life long time.

3. Avoid sudden temperature changes, when the cookware high temperature, pls don't put the cold water, prevent enamel coating fall off.

4. Avoid overheating, this cookware have thermal conductivity, high temperature heating will be make cookware body overheat,It is recommended to use low heat heat

5. Pls wipe up after use, put the well-ventilated area, if put the wet place not good for the cookware.

6. It is forbidden to excessive knock against,To prevent the enamel coating fall off.

7. You'd better use Wooden shovel or silicone shovel, Avoid using metal shovel and a steel ball, So as not to scratch the enamel,Affect the service life.

8. Enamel cookware adopt stand mould make, when the iron water put into the mould will be happen a lot of pneumato, so the end product will be have Trachoma stomatal. Enamel coating choose inversion spray so the edge of the pan will be have some silver gray irony. Pls note that this is not quality problem, when you clean the cookware, edge wipe vegetable oil to rust protection.

9. Special cookware cover also anomaly, in the produce have Uneven gravity is produced,result in body and cover have a little gap,this is normal circumstances, pls don't worried.

  If you mind this imperfect, pls think carefully about buying.

  Shipping packaging and shipping process

  Shipping by sea and shipment process

Professional packing method is very important for oversea delivery. Because you need to receive a good quality stock pot NOT destroyed one. WIN TEND packing method not only perfect protect the good also much save shipping cost. 

  Production process

  Production process