Small Blowing Popcorn Machine, Quantity Discount

Capacity: add 2 spoons each time 60g corn, can burst 2.2L popcorn

operation guide

  1. Remove the measuring spoon and popcorn machine from the transparency cover.

  2. Put popcorn machine in the corn aluminum cylinder. Don't plug corn tightly. Do not use corn more than 2 spoons or less than 2 spoons or put corn more than the edge of the spoon. If the machine put too much corn inside, which may lead to overheating, thick smoke, scorched corn, or other faults.

3. Put the transparent upper cover back to the machine base, carefully align the cover in the groove, and install it correctly.

4. Put the measuring spoon back to transparency cover. The measuring spoon is only suitable for One Direction. No popcorn with transparency cover and spoon not put back.  Place a heat-resistant bowl under the Popcorn slot to collect popcorn. Depending on the type of corn kernels used, a batch of 1.8 liters of popcorn may burst, so you may need to switch to the second bowl during the burst. Never leave unattended when operating.

5. Insert into the socket of 220-240V, it is better to separate the socket from other electrical appliances to prevent circuit overload.

6. Press the switch to the ON position. Popcorn will be completed in about three to four minutes.

7. When the popcorn is completed, press the switch to the OFF OFF position and pull out the plug from the socket.

8. Some exploded or unexploded corn may remain in the aluminum cylinder. Make sure the burst has stopped before removing the lid and spoon. Use heat pad or oven gloves, carefully remove the upper cover and pour all remaining corn, including the unexploded, into the bowl. Put it back to the upper cover quickly, because the cover becomes hot during the burst process, if it cools in the unbalanced position, it may not be able to install it back into the groove of the main body accurately.

9. Sprinkle melted butter on popcorn if necessary. Do not add butter to the aluminum cylinder where corn is still bursting.

10. Before blasting the second batch, check the aluminum cylinder and make sure it is empty. Use the heat pad or oven gloves, remove the transparency cover, turn the popcorn machine base upside down on the countertop or container, and remove any remaining corn. Clean and dry the removable measuring spoon and put it back to the transparency cover. If the second batch is burst, make sure that the aluminum cylinder has been emptied and only fresh corn is used.

Suggestion: to protect the life of the machine, re-explosion the second batch of popcorn please give machine 15 minutes rest cooling gap.