The flasher we produce adopt advanced SMD patch technology, with automatic voltage stabilization protection function, good load capacity, in6V/12V,48V/60V when used on motorcycles and electric vehicles, the starting speed is fast, the brightness is stable, the flash is clear, and the frequency is not affected by voltage and external temperature, thus effectively improving the service life.

Flasher features:

1. Divided by voltage6/12V,48/60V.

2. It can be divided into square, round, U disk type.

No matter what appearance does not affect the function, one incoming line and one outgoing line. Flasher without wire is marked with letters next to the plug B (W) and letters (P) L. B the end is the power supply, L this end is the power supply.

3. According to the connection method, it is divided into with wire and without wire, with wire2 line and3 wire, directly replace with plug without wire.

Note: motorcycles and electric vehicles work in the same way, so they are universal products.

1, motorcycle is generally used6V/12V, if there is a converter for electric vehicles, generally12V, common with motorcycles, electric vehicles without converters36V,48V,60V etc. Pay attention to the voltage of the old flasher before replacement, or know the voltage of steering bulb by flasher. If it is connected backwards, flasher will not work properly, and the turn signal will not flash and will only be on all the time.

2, flasher mainly two wires are working, one is in the power supply and one is out of the power supply, and the other one is not working and does not need to be connected. If there is a black line, a red line and a gray line on the motorcycle, we only need to connect the black line and the red line.

3, flasher with beeping function, when turning on the turn signal, flasher will make a fixed frequency of beeping sound.