in stock wholesale led smart door lock induction lamp light control infrared infrared sensor lamp induction lamp toilet light cabinet bag light

Model: L0403

Color: Silver, White available

Packing: Neutral English Packing

Product Features:

1. The automatic sensing LED door lock light uses infrared sensor technology and light automatic detection technology.
2. When a hand approaches the door lock, the LED light installed above the lock automatically illuminates.
3. To make it convenient and reassuring for you to enter your home.
4. You don't need to feel your way around in the dark at your door.
5. When you leave, you don't have to lock the door in the dark.

Product Specifications:

1. Sensing Mode: Infrared sensor for human presence
2. Induction Control: Photocell Sensor (Operates at Night, Powers Down During the Day)
Sensitivity Angle of the Sensor: 60 degrees
Sensitivity range of the sensor: within 3 meters
5. Power: 1.5V, 1PCS AA Lr06 or rechargeable battery (not including the product)
6. LED: High-brightness white LED
7. Number of LEDs: 4
8. LED Life: 100,000 hours
9. Delay Time: The light will turn on when someone enters and turn off automatically after 5 seconds once the person leaves.
Standby Current:
Battery Life: The high-performance Lr06 battery can last more than 6 months (3-5 times per day).
Working temperature: -5°C to 38°C
13. Work humidity: 5%-93%
Product Size: L*W*H: 81*46*30mm
Weight: 75g

Installation Method:

1. Use double-sided tape to fix (included with the factory).

2. Use M3.0X20 mm screws to fix the base (screws are to be provided by yourself).

Troubleshooting:

1. When the power is turned on, the light does not illuminate.
Solution: A. Check the polarity of the battery installation.
B. When the environment is too bright, the light is in standby mode.
Battery is dead, please replace the battery.
2. When the power is turned on, the LED light flashes.
Solution: A. The host needs one to two minutes to stabilize the internal circuits.
B. The battery may be low on charge, please replace the battery.

Notes:

1. Do not place the product in a place facing the glass door or where the temperature experiences sudden changes.
2. Because this product with infrared sensors requires a relatively stable environment.
3. Please place the light away from the monitor and television.
4. Please note the temperature and humidity of the working environment, as otherwise the battery life will be affected.
Use high-quality LR06 (AA) 5-volt batteries.
6. After the light turns off, there is a 6-8 second delay, then it will work again.
7. Please do not directly shine LED lights into people's eyes, especially children.
8. When installing the product, do not place it in a place where children can easily reach, to prevent any accidents from happening to children.