X Email Mobile
EXW Price: |
|
Main Products: |
Dough kneading,dish brush,shovel,fresh cover,chocolate mold,ice cream mold |
Contacts: | Wang Jun yingChat |
Mobile: | 86-15857936600 |
E-mail: | 576457125@qq.com |
WeChat: | 15857936600 |
Address: | 35852 B, 8 Street, 2 F, 87 Gate, International Trade Mart (District 4). |
8 even heart-shaped cake mould
1. Silicone cake mold raw material adopts Edible Silicon, passed FDA/LFGB standard
2. Non-stick, easy demoulding, easy cleaning, low carbon, can be recycled
5. Heat evenly.
Note:
Product description:
(1) use high quality silicone materials and have passed the certification of FDA and SGS.
(2) withstand temperature range:-40~220 degrees Celsius.
(3) tasteless, dust-resistant, durable, impermeable and easy to clean.
(4) it can be used in oven, microwave oven, dishwasher and refrigerator.
(5) easy to handle.
Cleaning and maintenance of silicone mold
1. Before use, clean it with clean water or detergent to remove surface dust. Before the mold is used for baking, a small amount of butter can be used to smear the inside of the mold. When using the die, if there is an empty tank, water can be added to the empty tank, and air burning is prohibited.
2. After each use, it can be soaked in diluted cleaning solution for 10-30 minutes. Please clean it with soft cloth when cleaning. Do not use rough cleaning ball and other articles to avoid scratches and damage to the mold. Please dry it after cleaning and place it in storage box. Silica gel is prone to electrostatic reaction and absorbs tiny particles and dust in the air. When not in use for a long time, do not expose it directly to the air.
3. When used in the oven, be sure to place it in the middle of the oven, keep a distance of about 10cm from the heating tube, and keep a distance of 5cm from the four walls of the oven, so as not to damage the mold at high temperature.
4. Some molds have cracks, which have been cut and opened when leaving the factory, which is convenient for buyers to demolish. If there is no incision, the mold cannot be demoulded. When using, put plastic wrap or rubber band on the cut and pour liquid
silicone Mold product features:
1. Silica gel Silicone is mainly composed of silica gel, a natural ingredient existing in sand, stone and crystal. Not Rubber Rubber, not Plastic Plastic! Silica gel is a stone on the beach, low carbon.
2. Silica gel has high strength softness, corrosion resistance, temperature adaptability, is suitable for cooking, baking, and is simple and practical.
3. Through testing, it is sanitary, healthy, clean and convenient, and can breed bacteria and fungi. Therefore, there are a large number of silicone products in infant and medical supplies. Such as nipple, silicone plastic, etc.
4. Recyclable, durable and low energy consumption.
5. It has stable structural mechanical properties, so it has a good thermal endurance and a wide range of temperature resistance. The temperature resistance is minus 40 degrees, the temperature is 230 degrees, and the heating is evenly frozen.
6. It has corrosion resistance to cleaning agents and other kinds of corrosive substances and is easy to clean.
7. After use, no raw materials will stick to the mold.
TOP
Items have been added to the Inquiry Basket
There are items in the inquiry basket