functions 

1)Remote Lock
Press the button LOCK one the remote transmitter once to lock while the parking lights will flash once.
2)Remote Unlock
Press the button UNLOCK one the remote transmitter once to unlock while the parking lights will flash twice.
3)Car Search
When locked, press the button SIREN on the remote transmitter once to locate the vehicle white parking lights
will flash 60s or until we press the other button then will stop.
4)Trunk Release
Press the button MUTE/ FLASH / TRUNK one the remote transmitter once to release the trunk while the parking lights
will flash three times.
5)Step on Foot-Brake to Lock / Unlock
Turn the ACC into "ON" position, vehicle will lock automatically when you step on the foot-brake.
Turn the ACC into "OFF" position, vehicle will unlock.
6)Negative / Positive Output Option for Trunk Release Plug in + for +12V output;
Plug in - for -12V output ( to ground ).
7)Electronic / Pneumatic door lock option
Change the position of JP1 to select electronic and the pneumatic door lock. [if it is set in short circuit,
system is with electronic door lock(0.5s) / if it is set in
open circuit, the system with pneumatic door lock(3.5s)]
8) Power window output (yellow color)
Press" LOCK "button once, turning lights flash once and door lock, now the power window signal output negative
trigger 25s.

Car Keyless Entry System

1. Lock

Press the button to lock once, and Flash once at turn signal; At this time, the LED flashes once per second.

2. Unlock

Press D once to unlock, turn signal flash twice; LED goes off.

3. Car search

Press once in the anti-theft state to determine the position of the vehicle. At the same time, the lamp flashes for 60 seconds, and the LED flashes once per second, or press other buttons to stop the lamp flashing.

4. Tail box

Press/-// D3 seconds to implement the tail box function.

5. Foot brake lock/ unlock

ACC turns to the ON position. When stepping ON the foot brake after 15 seconds, the vehicle will lock automatically.

ACC turns to the OFF position, the car turns OFF, and the vehicle will unlock automatically.

6. Tail box positive and negative output selection

Add + to +12 output.

Plug-in:-12 output (ground wire).

7. Electric lock/ steam lock selection

In anti-theft host, JP1 selects the function of electric lock and gas locking. (Short circuit is electric lock 0.5 seconds/open circuit is gas locking 3.5 seconds)

8. Window lifting function

Press the remote control key, the car lights flash, and the remote control lock automatically locks. At this time, the window rising signal is output for 25 seconds.

9. Learning Code( in the anti-theft State)

Long press the host code learning button switch for 1 second, turn signal lights up, and press any remote control key at the same time, each code learned, turn signal flash