power torch multi-function torch solar flashlight lamp rechargeable flashlight camping

Precautions
1. The flashlight should be charged regularly; do not leave it unused for long periods. If not used frequently, recharge it every three months, otherwise the battery life will be reduced.
2. Do not use the product during charging, to prevent damage to the LED light or internal charging components of the power source.
3. Do not direct the light source at the eyes to avoid affecting vision. (Children should use it under adult supervision)
4. Do not expose this product to rain or moisture.
5. Please keep away from flammable and explosive materials during each charge, and the charging time should not exceed 16 hours. (It is recommended to charge during the day)
LED flashlight usage / maintenance instructions
1. Do not use above the specified pressure limit; the voltage should not exceed 4.2V. The positive terminal of the battery must face forward; do not reverse it, otherwise the board may burn out. Pay attention to controlling the temperature of the flashlight and ensure proper heat dissipation. Non-professionals should not open the circuit board.
2. The repair of the circuit board or light bulb is no longer covered by warranty; the opening or processing of the circuit board is also not covered by warranty.
3. The charging methods for lithium batteries and mobile phone batteries are completely different; lithium batteries have no memory effect, allowing charging at any time when needed, but overcharging or overdischarging should be avoided; when not in use for a long time, remove the battery, store it in a cool place, and charge it normally every three months.
4. Special note: Use a charger with “three protections” such as overcharge protection, reverse connection protection, and short circuit protection;
5. Cooling techniques: During use, ensure proper cooling of the flashlight. Grip the flashlight tightly with hands is an effective cooling method; it is recommended to turn it on and promptly dissipate heat or turn it off based on the flashlight’s heat generation, and turn it back on once the temperature has dropped for better cooling.
6. Wipe with a clean, soft cloth after each use;
7. When the flashlight gets dirty with sewage or corrosive liquids, clean it promptly with clean water and dry it with a hairdryer;
8. If the lamp head and tail cannot be turned smoothly, apply a small amount of lubricant at the interface;