modern simple 3d foam wall sticker tv background wall bedroom wave pattern anti-collision thickened attached aluminum film wall sticker

Contact online customer service or call for more information.TEL: 18868554531Learn more about the styles

The colorful wallpaper has a very obvious decoration effect, which can transform the room into various atmospheres. Moreover, the cost is quite affordable. What is the process of wallpaper installation?

How to apply self-adhesive wallpaper?

1. Before pasting wallpaper, use a brush to brush the wall surface to be pasted. Pay attention to the dryness of the wall surface to avoid dust and humidity affecting the pasting effect. If the wall surface is not flat, with concave holes, it must be filled with soil and then scraped flat. Also, prepare the corresponding tools. Some tools are provided when purchasing wallpaper.

2. Measure the height of the wall where you want to paste the wallpaper with a ruler, and then start to cut the wallpaper. When cutting the wallpaper, try to leave about 5 centimeters on each side to facilitate the processing of the corners in the later stage. Note that if there are patterns on the wallpaper, pay attention to the beauty of the splicing part of the later flower line.

3. After the wallpaper is cut to size, you can pour the base film into a bucket filled with water and mix it with clean water. Then, apply the mixed base film evenly to the wall. Be sure to cover the joints as well.

Step 4: Pasting is a critical step. Start pasting from one side of the wall and stick along one direction. The first piece of wallpaper is usually pasted near the door, and then separate the wallpaper and paste it from top to bottom. When pasting, use a scraping board to scrape horizontally from one side to the other to remove the air below. When separating the wallpaper, make sure to separate it more, otherwise it is easy to appear bubbles when pushing the air. Make sure the wallpaper is flat and tightly adhered to the wall. Then cut off the excess wallpaper at the top and bottom. After all the wallpaper is pasted, use a sponge soaked in water to completely wipe away the adhesive residue on the surface of the wallpaper, and that's it.

5. After the wallpaper is pasted, the rough edges around the wallpaper need to be cut. After leveling with a shield, cut the wallpaper evenly with a wallpaper knife. Pay attention to the cutting of the wallpaper around the doors, windows, power switches, and so on.