Wholesale by Manufacturer
Support one-time shipment
Quality problem returns (self-funded shipping).

Notes
1. Contains pressurized flammable gas, please keep away from children.
2. Do not pierce or throw around the lighter, and do not throw it into the fire;
3. Please use in a ventilated environment and be aware of flammable materials.
4. The direction of the fire should be strictly prohibited from facing the face, skin, and combustible materials such as clothing to avoid danger;
5. When igniting, please make sure to identify the position of the flame outlet and press lightly to light it. Different types of lighters use different methods for ignition.
6. When using, if there is any ash or other debris falling into the fire outlet by accident, it should be immediately blown away with force to remove the debris, otherwise it may cause a fire to occur;
7. When the lid of the rotary engine, sandpaper, or gasoline lighter is opened, the gas will begin to escape. Therefore, please ensure to close the lid tightly when not in use to prevent gas escape;
8. This product is not suitable for lighting. Please do not burn for more than 1 minute to avoid scalding the skin by high temperature;
9. Do not leave lighter in a high-temperature environment for a long time (50°C/122°F), and avoid direct sunlight for a long time, such as around stoves, closed car compartments and trunks in outdoor areas.
10. Due to the climate restrictions on burning conditions in areas above 3000 meters, the ignition performance of windproof and direct-shot lighters will be significantly affected. At this time, it is recommended to use open flame lighters;
11. For portable and other craft-type lighters, it is necessary to clearly identify the seven exit fire openings, the press-to-fire mechanism, the air intake, and the flame regulator to ensure proper use.
12. Use only qualified butane gas. Poor-quality gas may damage the lighter or reduce its service life.
Regulate the flame
1. When using, the flame height may vary to some extent due to the decrease in product air content and changes in surrounding environmental temperature. This is a normal phenomenon, and you can adjust the flame height appropriately.
2. When using, the normal flame height should be regulated at:
Liquefied gas lighters with a diameter of 1.5-2.5 cm are classified as windproof and direct-stream types; loud, gasoline, and open flame lighters have a diameter of 2.5-4.0 cm.
3. If you need to adjust the height of the flame, please use a screwdriver to align with the recess of the flame regulator; if the lighter itself has a regulating ring, you can directly adjust the flame height by turning the ring in the (-) arrow direction, which is clockwise, to lower the flame height.
Turn in the direction of the (+) arrow, i.e. counterclockwise, to increase the flame height.
4、汽油打火机应通过调整点火灯芯的高度来控制火焰高度。火焰高度过高，可用剪刀剪去灯芯少许；
If the flame height is too low, you can appropriately pull out the wick.
Gas filling method
1. When refueling, there must be no sparks or fire sources around to ensure safety. Do not smoke while refueling;
2. Only use qualified butane gas. Poor-quality gas may damage the lighter or reduce its service life.
3. When refueling a standard model, invert the lighter, align the gas bottle with the lighter's air intake, and press down a few times with a force, each time for about 2 seconds; If the gas cannot be injected, it may be due to residual air in the gas tank. In this case, you can release the air. You should hold the lighter vertically, and use a small screwdriver to urgently release the air at the air intake 1-2 times, then invert the lighter to perform the refueling operation;
4. When refueling gasoline, you should open the head cover, remove and turn the engine core, lift the outer sponge to add the appropriate amount of gasoline, wait for the gasoline to penetrate the inner layer of cotton, cover the outer sponge, and then insert it into the engine shell;
5. After refilling various lighter fuels, it is necessary to wait at least one minute to allow the newly charged gas to adjust to room temperature. Additionally, wait until any residual gas on the lighter's exterior has completely evaporated before attempting to light it. If you attempt to light the lighter immediately, it may ignite the residual gas on the exterior, causing unnecessary danger. After refilling the gas, if the flame height is too high or too low when used, this is normal. You can adjust the flame height appropriately.