Tube motor shutter door controller manual

i,          product technical parameters

operating voltage: AC220V

ambient temperature:-20℃-60℃

output Current: 2A/220VAC

remote control distance: ≥ 50 meters

decoding method: Single Chip Microcomputer decoding (optional fixed code remote control and learning code remote control)

operating frequency: 433MHZ

product standard: one control box, metal remote-controller two, one connection plug, one manual

II,          product Features

the remote control pair with the controller uses millions of learning code coding chips, with extremely low bitrate and safer use.

III,          code matching/reverse setting

this product has learned to pair remote control with the controller before leaving the factory. There is no need to pair it again before use. If you need to increase or decrease remote control, follow the following code matching steps.

Code matching

1,            press the stop key on remote control to stop the motor.

2,            press the code key on the controller to let go, the power indicates that the red light is off, and then press remote control any key. The power indicates the red light, flashing three times, indicating that the code is successfully matched.

Clear the code (clear all remote control matched by the controller according to the code cleaning procedure)

press the code key on the controller for a long time. The power supply indicates that the red light flashes three times from on to off, indicating that the code is cleared successfully. (All remote control previously paired with the controller have been cleared)

motor forward/reverse setting

when you need to change the forward and reverse direction of the motor, press the remote control lock key for about 6 seconds. The controller power indicates that the red light flashes three times, the forward and reverse rotation of the motor is set successfully (release the remote control lock key when the power indicator red light flashes at the beginning). Go back to the previous step and follow the same operation.