2 T Electric Scissor Jack Car Electric Jack

 

Scissor Jack

English name: scissor jacks

Its structure shape is like scissors, which is called scissor jack.

Scissor Jack is a kind of lifting equipment, which is mainly used for lifting small tonnage cars, such as cars. Common specifications include 1T (ton), 1.5T (ton), 2T (ton), 3T (ton), etc.

Scissor Jack is also called bracket Jack, which is light and fast. It is a product on board of major domestic automobile factories with different principles. It consists of upper support pole and lower strut made of metal plate. The cross section of upper support pole and the cross section of the lower support rod in the tooth part and its vicinity are rectangular with one opening, and the metal plates on both sides of the opening are bent inward. The teeth on the upper support pole and lower strut are made of metal plates bent on both sides of the opening, and the tooth width is greater than the thickness of the metal plate.

 

 ★ Note: when supporting the vehicle with a jack, it is forbidden to enter the underbody for operation. Only after security support support is used can the underbody be operated.

 ★ Note: Do not overload the jack.

 ★ Note: to ensure the normal use of this Jack, please keep the screw pair of the Jack clean and lubricated.

 

 

 

Instructions for use:

1. Fix the parking brake, set the automatic gear in the "P" position, and set the manual gear in the first or reverse gear.

2. Fix other tires with tire pads or wood (en) pallet.

3. Put the jack on the support point groove for use.

4. Do not exceed the rated load when using the jack.

5. When the Jack lifts the vehicle, do not climb into the bottom of the vehicle.

6. Do not place pads on the Jack head or base.

7. Park the car in a flat position.

8. If you can, please use the bracket to support the lifted vehicle.