self-adhesive waterproofing membrane self-adhesive waterproof and thermal insulation coiled material colored steel tile self-adhesive waterproofing membrane dedicated for roof covering

Self-adhesive waterproof and thermal insulation membrane, self-adhesive waterproof membrane for color steel roof tiles, and self-adhesive waterproof membrane specially used for full-coverage roofing.
A roof covered with rusty and leaky color steel tiles, cement-painted building roofs, aging and leaky felt sheets, and glass-covered roofs for waterproofing and insulation, with simple construction, no need for fire-baking or glue application, simply paste directly, and can last over ten years.
Application scope, suitable for electroplating, chemical, papermaking, ceramic, breeding, leather, dyeing and printing, high-temperature casting and other industries with severe corrosion, high waterproof and insulation requirements, such as color steel roof of factories, warehouses, and large shopping malls.
For more details, please contact customer service at 18639026652.Product Features:
1. Sunscreen, heat insulation, and light reflection: The surface temperature can be reduced by more than 20 degrees when exposed to the sun in summer, and the indoor temperature of the factory can be reduced by 6-12 degrees.
2. Waterproofing, rustproofing, acid-proof, corrosion resistance, UV resistance
3. Prevent roof aging, extend the service life of color steel roof factory more than 10 years, with beautiful appearance, and it is still possible to move around on the roof after construction is completed.
4. Effective rain noise isolation, particularly significant for steel structure factory roofs.
5. Corroded and leaky steel roofing does not need to be replaced.
6. Resistant to cold, unaffected by -40°C, with an outer aluminum layer for fire resistance and flame retardancy.
● Application Scope:
Usually suitable for the roof of steel structure factory buildings and other building top floors, insulating, waterproofing, sound insulation, anti-rust, damage repair, aging renovation: It is one of the more high-quality insulating and waterproofing materials. After installation, when exposed to the summer sun, it can reduce indoor temperature by 30%-40%, and the higher the temperature, the greater the cooling effect.
Add WeChat 18639026652 when needed.Construction base work conditions requirements: 1. Steel color base surface without dust, no loose. Loose parts after treatment can be constructed 2. The base surface shall not have water, dust, oil pollution phenomenon. If any, it must be treated before construction. 3. If the gap between steel color sheets is more than 03mm, it needs to be reinforced. Only after treatment can construction be carried out. 4. For the Yin-Yang corners, the corners of the vertical elevation walls and the horizontal corners of the vertical elevation walls, the gaps need to be treated. 5. If construction is carried out in the morning, when there is dew on the steel color sheet surface, construction must be stopped. 6. When rusty steel color is constructed, if the rust surface is more than 50, the rust on the steel color sheet needs to be removed. (Resistant to high temperature 80°C, low temperature)40°C) 7、When in contact with the cement base, the cement base is required to be solid and flat, and the base surface treatment agent is applied during construction. Construction process: 1. Clean the base surface: Use a mop to remove the dust from the color steel sheet, and if there is rust, it must be removed to achieve a smooth and clean surface. 2. Make an additional layer: Make an additional layer at the Yin-Yang corners, ventilation openings, gutter, etc. The additional layer is 15cm to 30cm wide, extending along the central axis of the Yin-Yang corners to lay. 3. Large-area construction: A: First, draw the baseline, so that the installed membrane is neat and beautiful. B: When laying the membrane, align the square membrane at the intended construction site, starting from the water flow downhill direction. The vertical wall is laid from the bottom to the top. C: Exclude the air, press the air in the membrane as it rolls, and firmly paste the membrane. D: On the nail cap of the color steel sheet, you can cut the tape into small pieces and paste it at the nail cap. For the repair of the old roof with local leakage, the local construction can be used for the pasting. E: The overlap edge of the membrane is 5cm long. F: When the membrane passes over the nail cap, it is not easy to pull the membrane too tightly, so it should be loosened, and try to make the membrane on the nail cap not too strong. 4: Local construction Targeting the color steel sheet overlap, gutter, fan, light well, etc., local construction, that is, use self-adhesive tape to paste all the color steel sheet overlap, gutter, fan, light well and other key parts, and cut the tape into small pieces at the nail cap. For the repair of the old roof with local leakage, the local construction can be used for the pasting.