2. Solve the fog problem

 3.360-degree IP68-level waterproof

 4. Convenient to use, power bank, computer, charger, and other USB devices for power supply

 5. Applicable voltage: 5V Rated power: 1.2W

 6. Built-in water cut-off protection

 7. Product Material: Shell ABS, Wiring TPE

 Product Size: Diameter 5CM, Height 2.1CM, Cable Length 1M

 Product weight: 28g (bare) 34g (with packaging)

 10. Packaging box size: 9.1*6*2.3CM

 11. The product can be custom-made in any color, with a minimum order quantity of 3000 pieces.

Product size: 51*51*20mm

Material: ABS

Power Input: DC5V.500MA

Weight: 35G

Case of 200 pieces, 51*27*27cm

The product has been tested repeatedly and the intermittent spraying issue has been resolved, with excellent results. Both semi-finished and finished products are subjected to dual testing to ensure quality. It comes with an LED work light and has no switch or timer. It can continuously work when there is water and automatically stops when there is no water. The water cut-off protection significantly extends the service life. The company offers a variety of colors to choose from, with sufficient stock. For large quantities, a 17% value-added tax invoice can be opened.

Operating Precautions:

Please add pure water or distilled water to the tank, not tap water or dirty water.

Do not add hot water above 40°C to the tank, or the color may fade or the shape may deform.

Do not allow water to flow into the machine from the atomization plate. If there is water outside the water tank, please wipe it clean with a dry cloth.

When the indoor temperature is below 0°C, please drain the water from the tank to prevent the components from being damaged when the water freezes.

Please do not put metal products, chemical substances, detergents, etc. into the water, otherwise, there will be poor fogging phenomena;

When the tank is full of water, please do not move it at will, or the water will overflow and enter the machine to damage the product.

Please do not place the humidifier in a place where strong light or direct radiation of hot air is present.

Do not place the humidifier near air vents and try to keep it away from furniture and electrical appliances.

Please do not directly add water to the machine's water tank.

* Please disconnect the power and unplug the plug when not in use for a long time (this product does not require grounding).

*The tank can be used continuously for 6-7 hours when full, without the need to add water.

Please do not touch the USB connector with wet hands, to avoid poor contact and electric shock.

* Do not use for a long time when the body is tilted.

* Do not touch the atomization film during the power-on process.

* Do not disassemble the body until the power is turned off, to avoid damaging the product.

* First time use or after a long period of storage, add water for 2 minutes before turning on the machine to ensure that the cotton swabs are fully soaked.

* When adding water, please use a container to pour the water into the center, do not add to the atomization film, the product edge and overflow, to avoid damage to the product;

Cotton swab replacement

If during a long-term use, the mist output becomes smaller, and the surface of the atomization sheet remains clean, the cotton swab has changed color and hardened, it is necessary to replace the cotton swab. The method of changing the cotton swab: rotate the lid on the atomization sheet to the left, gently pick up the atomization sheet and stand it upright, remove the cotton swab and replace it, then reset the atomization sheet, and then rotate the lid to the right to install it.