Set features: pure juice (only for fruits like apples, pears, cucumbers, carrots, melons, and celery with high water content), mixed juice (with pulp, requires water), soy milk (requires heating), smoothies, minced meat (only for lean meat, requires peeling, fat, and tendons), dry grinding, etc.

Kit List: Main unit + mixing cup (6-page blade) + strainer + mincing cup (4-page blade) + dry grinding cup, large cup capacity 1500ML, increased micro-control protection, drainage channel, blade upgrade, blade cup separation, cup body thickening. (Three cups and two blades with a strainer)

Notes: The machine has a micro-motion protection switch, and after the cup is installed, it must be firmly reversed and locked to the bottom to power on.

Mixed Juice Recipe: First, take out the filter net from the soy milk cup, cut the fruit into small pieces with a diameter of about 1CM, and put them into the soy milk cup. Then add water, making sure the water level covers the fruit. The total amount of fruit and water should not exceed 600ML. After that, cover the cup and stir it.

Ground meat can only be ground from pure lean meat.Peel, fat, tendons, add oil in the cup, continuous working time cannot exceed 30 seconds, more than 2 minutes, use more dynamic gear

Soy milk preparation: Soak soybeans for more than 8 hours. Add 2 cups of soybeans to a small measuring cup with a lid, and add 300 to 500ML of water. After mixing well, pour it out and cook it. Alternatively, cook soybeans soaked for more than 8 hours, then add warm water, mix well, and you can drink it directly.

Suggested Operations for Juicing, Dry Milling, Soybean Milk, and Milk Shakes:Work for about 30/40 seconds, pause for about 2 minutes, and repeat 2 to 3 times.

Must pay attention to the working time and the quantity limit, and pay attention to the pause interval in the middle, in order to avoid the motor overheating and automatically power off.

Motor overheating anomalies: A mild motor may have an unusual smell, while a severe case may smoke. After allowing the motor to completely cool down for about an hour, it can be used again. The unusual smell will disappear over time.