Electric Scissors with Box Electric Iron Scissors Metal Scissors Electric Drill Change Scissors

Model: RNT-005This one is the same as 003, but it has an additional aluminum alloy case.

The shearing thickness of ordinary carbon steel is0—0.8mmStainless steel0—0.6mm.。

Scissors Material:

50CR-V chromium vanadium steel forging

Standard Configuration:

Electric shears x1, hex-shaped grip drive rod x1 (suitable for clamping on a standard electric drill).SDS two-hole two-trough clamping drive rod x1 (suitable for clamping in imported Bosch electric hammer, etc.), 1/2" square hole drive rod (suitable for installation on electric wrenches)5mm hex wrench x1, 10mm combination wrench x1, single-handed operation cross-pull fixation bar x2, dual-handed operation auxiliary handle x1, screws, etc.

Net weight: Scissor blade component (excluding auxiliary handles, cross bars, etc.) - 0.86kg

Gross weight: including main components, accessories, and original packaging - 1.63kg.

Requirements for the matching electric drill:

Use a standard AC drill or a 14.4V or higher charging drill to clamp the drive shaft of the electric shears.

Electric shears: Useful Tips and Precautions
1. Attach the electric shears to the electric drill, and when it operates, the drill should rotate in a clockwise direction.
2. Because large torque is needed when cutting steel plates, the speed must be switched to the low gear, with the speed ranging from 350 to 1200 rpm.
3. After a long time of cutting, if the two knife edges show loose, please tighten the hinge nut appropriately, ensuring the force is moderate and not too tight, otherwise the two blades may become locked.
4. The cutting edge and bearing track should be regularly lubricated with oil.

Special Announcement:

Do not cut reinforcing bars, wire, or steel wire, use the right tool for the right job, please be aware.

"重防腐"可以翻译为 "heavy-duty corrosion prevention"。handle,Provide comfortthe use of。

Ingredients: inside-hexagonalWrench(Millimeter,Combination wrench(8毫米,经extending rod,Sleeveconnecting rodOne/ 2）,Handle,Drill chuck,nutAnd the screw

Electric Scissors Operation Video:http://www.tudou.com/programs/view/Z-ahy809yRI/

Model: RNT-005